Abstract:This paper studies the influence of the gate voltage of the power amplifier (PA) on the drain current and efficiency. This study proposes a theory of controlling input nonlinearity to improve the efficiency of PAs. The theoretical efficiency of the inverse Class F PA which controlling input non‐linearity is from 77% to 97%. A new design method for the inverse Class F PA reconstructs the design of the load admittance space into a region instead of a point. To verify the validity of the proposed theory, an inverse Class F PA is designed and fabricated using a commercial 10 W GaN high electron mobility transistor (HEMT). Results of the measurement show a high drain efficiency (DE) of 78.5%, a output power of 41.6 dBm and a large signal gain of 12.1 dB at 1.5 GHz. The overall PA's size is controlled at 80*50 mm2 . This paper studies the influence of the gate voltage of the power amplifier (PA) on the drain current and efficiency. This study proposes a theory of controlling input non‐linearity to improve the efficiency of PAs. The theoretical efficiency of the inverse Class F PA that controls the input nonlinearity is within the range of 77% to 97%. A new design method for the inverse Class F PA reconstructs the design of the load admittance space into a region instead of a point. To verify the validity of the proposed theory, an inverse Class F PA is designed and fabricated using a commercial 10 W GaN high electron mobility transistor (HEMT). Results of the measurement show a high drain efficiency (DE) of 78.5%, an output power of 41.6 dBm, and a large signal gain of 12.1 dB at 1.5 GHz. The overall PA's size is controlled at 80*50 mm2 .

The Effects of Limited Drain Current and on Resistance on the Performance of an LDMOS Inverse Class-E Power Amplifier

Improvement in Cavity and Model Designs of LDMOS Power Amplifier for Suppressing Metallic Shielding Cover Effects

Analysis And Design Of Class-E Power Amplifier Using Equivalent Ldmos Model With Drift Region Effect

Some improvements in the design of LDMOSFET power amplifier for effectively suppressing metallic shielding cover (MSC) effects

Electro-Thermal-Stress analysis of a LDMOS FET Breakdown under High Power Microwave pulses

Experimental Investigation and Analysis of the LDMOS FET Breakdown Under HPM Pulses

Shielding Cover Effects on the RF Performance of LDMOSFET Power Amplifier for WCDMA Application

Miller Effect Analysis and Noise Optimization of CMOS Low Noise Amplifier

Investigation on conductive electromagnetic pulse (EMP) effects on the breakdown of GaAs MESFET-built power amplifiers (PA)

Efficiency Enhancement of Class-E Power Amplifiers at Low Drain Voltage

Analysis of Passivation Techniques in InP HEMTs and Implementation of an Analytical Model of F(t) Based on the Small Signal Equivalent Circuit

Design of a broadband high‐efficiency extended resistive continuous Class‐B/J power amplifier with novel drain voltage waveforms

Performance Study of an Inverse Class E Power Amplifier with Series Tunable Parallel Resonant Tank

Investigation of Inverse Class-E Power Amplifier at Sub-Nominal Condition for Any Duty Ratio

Performance Study Of A Subclass Class E Power Amplifier In Comparison With The Typical One

Input–output waveform engineered inverse Class F power amplifiers with high efficiency

A novel broadband class E power amplifier with inductance feedback

A CMOS class-E Power Amplifiers with Power Control

A High-Efficiency Class E Power Amplifier with Integrated Finite DC Feed Inductance

A Class E GaN Microwave Power Amplifier Accounting for Parasitic Inductance of Transistor.

Class E Power Amplifier Design with a Modified Load Network