Abstract:The circuit-level simulation analysis of the single event transient response of an on-chip single event latchup protection switch (SPS cell), previously designed and developed in the IHP 250 nm CMOS process, is presented. The SPS cell provides the latchup protection for standard cells on the principle of power domain control. It is based on a sensing/driving PMOS transistor which acts both as a latchup sensor and a driver for the standard cells, and includes additional PMOS and NMOS transistors for controlling the sensing/driving transistor and interfacing to the external control logic. The previous work has confirmed the SPS cell’s functionality in the case of single event latchup, and the experimental investigation has proven that the SPS cell is immune to single event latchup for LET values up to 74.8 MeV∙cm2/mg. This case study extends the previous research by introducing the circuit-level simulation of the SPS cell’s response to the single event transients (SETs). Using the square pulse current as a SET model, the amplitude and duration of the SET-induced voltage pulses at the SPS cell’s outputs have been analyzed with respect to the injected charge, operating temperature, supply voltage, load (number of standard cells connected to the SPS cell) and sensing/driving transistor’s channel width. The results have shown that the immunity of the SPS cell to SETs can be significantly enhanced by connecting a larger number of standard cells to the SPS cell and increasing the sensing/driving transistor’s size, without any area overhead. An analytical expression for calculating the critical charge in terms of the transistor size and the number of standard cells connected to the SPS cell has been derived. Moreover, the SPS cell can be used as a SET sensor for detecting the levels of injected charge which cannot be mitigated by the increase of transistor size and load, and in conjunction with the external control logic it could be possible to measure the SET duration and perform online corrections of the SET-induced faults in the standard cells supplied by the SPS cell.

Complete Clock-Feedthrough Cancellation in Switched-Current Circuits by Combining the Replica Technique and the N-step Principle

A New Scheme for Complete Cancellation of Charge Injection Distortion in Second Generation Switched-Current Circuits

A 12-Bit 1gs/s Current-Steering DAC with Matching Capacitor in Switched Current Cell

A MEMORY CHARACTERIZATION METHOD BASED ON CIRCUIT REDUCTION

-Memory Computing Based Reliable and High Speed Schmitt trigger 10T SRAM cell design

A Double-Break Current Injection Vacuum DCCB: Principle and Analysis

Charge-Compensation-Based Reference Technique For Switched-Capacitor Adcs

A Random Delay Injection Based Clock Domain Crossing Verification Method

An Offset-Cancellation Technique Using Charge-Trap Transistors and Asynchronous Programming Scheme

An Area-Efficient Dual Replica-Bitline Delay Technique For Process-Variation-Tolerant Low Voltage Sram Sense Amplifier Timing

Single-Event Multiple-Transient Characterization and Mitigation via Alternative Standard Cell Placement Methods

A Clock-Feedthrough Compensation Technique for Bootstrapped Switch

A New Approach to Single Event Effect Tolerance Based on Asynchronous Circuit Technique

An Advanced Multiple-Input-Switching Current Source Model for Gate Cells

A Leakage Current Suppression Technique for Cascade SRAM Array in 55 Nm CMOS Technology

Characterization of Charge-Trap-Transistor (CTT) Threshold Voltage Degradation and DifferentialPair-Based Memory Design

Error Cancellation Flip-Flop Design with Lightweight In-Situ Error Correction

Combining Circuit Level and System Level Techniques for Defect-Tolerant Nanoscale Architectures

A Novel Technique to Suppress Multiple-Triggering Effect in Typical DTSCRs under ESD Stress

Circuit-Level Simulation of the Single Event Transients in an On-Chip Single Event Latchup Protection Switch

A Charge Pump with Perfect Current Matching Applied to Phase-Locked Loop in 65nm CMOS.