Abstract:Two-phase flows in rod bundles or tube bundles appear in heat transfer systems. The bundle-average (or one-dimensional) void fraction is a critical parameter in overall system design, performance evaluation, and safety assessment. Accurate bundle-average void fraction prediction requires a precise interfacial momentum transfer term formulated using the distribution parameter and drift velocity, two essential drift-flux parameters in the drift-flux model. The currently utilized modeling approach is based on the distribution parameter and drift velocity determined together through drift-flux plots. This results in possible compensation errors between the distribution parameter and drift velocity in the model validation process. The independent validation of the constitutive equations for the distribution parameter and drift velocity has been challenging due to experimental difficulty in measuring detailed two-phase flow structures in rod bundles. The present study proposes an approximation methodology to obtain subchannel average two-phase flow parameters using local two-phase flow data measured at two local points: the subchannel center and minimum gap center in a rod bundle. The distributions of subchannel average two-phase flow parameters are invaluable in benchmarking subchannel analysis codes. Comprehensive subchannel average void fraction and gas velocity mappings are given to discuss the effects of gas and liquid velocities, pressure, spacer grid, and developing length on the two-phase flow characteristics in the rod bundle. The bundle-average distribution parameter values calculated by subchannel average two-phase flow parameters are used for independent validation of the constitutive equations of the distribution parameter. The bundle-average drift velocity values back-calculated using the distribution parameter values are also used for independent validation of the constitutive equation of the drift velocity.

Applicability of Void Fraction Models in Rod Bundle at High Quality Conditions

Research on void drift between rod bundle subchannels

Void Fractions in a Rod Bundle Geometry at High Pressure–part Ⅰ: Experimental Study

Mechanistic Model of Critical Heat Flux in Rod Bundles Based on a High-Precision Subchannel Code

Applicability Research of Round Tube CHF Mechanistic Model in Rod Bundle Channel

Void Fractions in a Rod Bundle Geometry at High Pressure–part Ⅱ: Drift-flux Model Assessment and Development

Critical Power and Void Fraction Prediction of Tight Bundle Designs

Improvement of mixing vane crossflow model in subchannel analysis

Research on prediction of non-uniform heated rod bundle CHF based on subchannel analysis code coupling modified mechanistic model

Flow characteristics of dispersed two-phase flows in an 8 × 8 rod bundle

Analysis of Subcooled Boiling in PWR Rod Bundle Channel

An Experimental investigation of void fraction characteristics of Flow Boiling in a 5×5 rod bundle channel

DNB Type Critical Heat Flux Prediction in Rod Bundles with Simplified Grid Spacer Based on Liquid Sublayer Dryout Model

Application of the Improved Spacer Grid Model in Subchannel Analysis Code

Assessment of a Theoretical Model for Predicting Forced Convective Critical Heat Flux in Rod Bundles

Fluid-to-fluid Modeling of Critical Heat Flux in 4×4 Rod Bundles

Prediction of critical heat flux in rod bowing geometries by coupled subchannel analysis and mechanistic model

The numerical investigation of the thermal–hydraulic behavior in a 3 × 3 rod bundle with spacer grids

A Correlation Of Heat Transfer Non-Uniformity In Rod Bundle And Its Application To Sub-Channel Code

Study on Void Fraction Prediction Model for Rod Bundle Based on LM Algorithm

A Mechanistic Bubble Crowding Model for Predicting Critical Heat Flux in Subchannels of a Bundle