Abstract:Different micro-regions of weldment are expected to present various cyclic softening behaviours during creep-fatigue interaction (CFI), which has a significant influence on the remaining mechanical properties. The present work aims to investigate the cyclic softening and remaining creep behaviour of different micro-regions of P92 steel weldment using electron backscattered diffraction (EBSD) and nanoindentation technology. CFI tests were performed and interrupted at various pre-set fatigue cycles at elevated temperature of 650 degrees C and hold time of 180 s, and thereafter EBSD analyses, nanoindentation tests and high-temperature creep tests were conducted on these interrupted specimens. Experimental results reveal that the microstructure of the parent metal and fine austenite grain heat-affected zone, which is adjacent to the intercritical heat affected zone, are sensitive to CFI loading. Notably, the microstructural evolution in intercritical heat affected zone almost reaches saturated after fatigue cycles of 20%Nf. Nanoindentation results uncover that the intercritical heat affected zone exhibits the lowest elastic modulus and micro hardness, and with increasing the number of fatigue cycles, the weakest region changes. Accordingly, creep fracture location transits and creep life was degraded. Finally, a fatigue damage parameter based on the microhardness was developed to capture the effects of CFI on remaining creep life. (c) 2021 Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).

Microstructure,property and Creep Failure Mechanismof T92 Dissimilar Materials Joints

Microstructural Analysis on Creep Properties of Dissimilar Materials Joints Between T92 Martensitic and Hr3c Austenitic Steels

Research on Multiaxial Creep Properties of P92 Steel Based on Improved KR Creep Constitutive Model

DSI-based Studies of the Effects of High-temperature Aging on Local Mechanical Properties of HR3C/T92 Dissimilar Steel Welded Joint

Assessment of creep rupture properties for dissimilar steels welded joints between T92 and HR3C: CREEP PROPERTIES OF T92/HR3C WELDED JOINTS

Creep Fracture Behavior of Dissimilar Weld Joints Between T92 Martensitic and HR3C Austenitic Steels

Microstructure Evolution and Life Assessment of T92 Steel During Long-Term Creep

The Effects of Tensile and Compressive Dwells on Creep-Fatigue Behavior and Fracture Mechanism in Welded Joint of P92 Steel

Review onrelationship between microstructure transformation and mechanical properties of T/P92 steel

Remaining creep properties and fracture behaviour of P92 steel welded joint under prior low cycle fatigue loading

Microstructure and mechanical properties of dissimilar materials joints between T92 martensitic and S304H austenitic steels

Experimental and Numerical Characterization of Low Cycle Fatigue and Creep Fatigue Behaviour of P92 Steel Welded Joint

Creep Behavior and Microstructure Evaluation of Welded Joint in Dissimilar Modified 9cr–1mo Steels

Microstructural Evolution of P92 Steel During Creep

Research on microstructures and mechanical properties of T92/S304H dissimilar weld joint

Characterization of the Cyclic Softening and Remaining Creep Behaviour of P92 Steel Weldment

Study on Type IV Cracking Behavior of T92/Super304H Dissimilar Steel Welded Joints in Long-Term Service

Creep Behavior and Fracture Mechanisms of the Dissimilar Inertia Friction Welded Joints of Deformed and Powder Metallurgy Ni‐Based Superalloys

Aging Treatment on the Microstructures and Mechanical Properties of New Groove T92/Super 304H Dissimilar Steel Joints

Creep behavior and in-depth microstructural characterization of dissimilar joints

Influence of Aging Treatment on the Microstructure and Mechanical Properties of T92/Super 304H Dissimilar Metal Welds