Abstract:Mixed-conducting oxygen permeable membrane is a kind of ceramic membrane, which exhibits both electronic and oxygen ionic conductivity. At high temperature, oxygen can permeate through the membrane in the form of oxygen ions. So on the membrane surface, there are many oxygen species (O-, O-2(-), O-2(2-) and O-2(-)), which can improve C-2 selectivity of oxidative coupling of methane (OCM). A dense tubular membrane made of Ba0.5Sr0.5Co0.8Fe0.2O3-delta (BSCFO) was prepared by the plastic extrusion method. OCM was investigated in the tubular membrane reactor. C-2 production rate in the BSCFO membrane reactor is much higher than that in La0.6Sr0.4Co0.8Fe0.2O3-delta ( LSCFO) and La-Ba-Co-Fe-O (LBCFO) membrane reactors. The reason is that the vacancy concentration in the BSCFO is higher than that in the LSCFO and LBCFO. The higher vacancy concentration not only accelerates the diffusion rate of oxygen ion but also increases the activation rate of methane. So the BSCFO is more active for OCM than the LSCFO and LBCFO. The C-2 production rate increases with the increase of temperature and methane concentration in the feed. However, the C-2 selectivity is determined by the competitive result of oxygen ion recombination and OCM reaction. High rate of oxygen ion recombination will decrease the C-2 selectivity. The methane conversion increases while C-2 selectivity decreases with the increase of oxygen partial pressure in the oxygen-rich side. This result indicates that the gas-phase reaction plays an important role in the OCM reaction. There is a large amount of O-2 in the products which results in the modest increase of the oxygen permeation flux, compared with the case of air/He.

Methane Conversion to C_2 Hydrocarbons in Solid State Oxide Electrolyte Membrane Reactor

Activation of Methane over Perovskite Catalysts

Oxidative Coupling of Methane over SrO/La2O3 Catalyst in an Oxygen-Permeable Separation Membrane Reactor

Oxidative Coupling of Methane in Ba0.5Sr0.5Co0.8Fe0.2O3−δ Tubular Membrane Reactors

Study on Oxidative Coupling of Methane in Oxygen Permeable Tubular Membrane Reactor

Oxidative CO2 reforming of methane in La0.6Sr0.4Co0.8Ga0.2O3-δ (LSCG) hollow fiber membrane reactor

Selective Oxidation of Ch4 and C2h6 over A Mixed Oxygen Ion and Electron Conducting Perovskite-A Tap and Membrane Reactors Study

Partial Oxidation of Methane to Syngas in a Perovskite Hollow Fiber Membrane Reactor

Selective electrochemical oxidative coupling of methane mediated by Sr2Fe1.5Mo0.5O6-δ and its chemical stability

Partial Oxidation of Methane to Syngas in BaCe 0.15 Fe 0.85 O 3−δ Membrane Reactors

Sr2Fe1.575Mo0.5O6- δ Promotes the Conversion of Methane to Ethylene and Ethane

In Situ ESR and TPSR Measurements of SrTi0.975Li0.025O3-δ Nanocatalysts for Oxidative Coupling of Methane at Low Temperature

Low coordination number copper catalysts for electrochemical CO2 methanation in a membrane electrode assembly

Methane reforming to syngas over LaNi x Fe 1−x O 3 (0≤ x ≤1) mixed-oxide perovskites in the presence of CO 2 and O 2

In Situ Exsolved CoFe Alloy Nanoparticles for Stable Anodic Methane Reforming in Solid Oxide Electrolysis Cells

Direct Conversion of Methane to C2 Hydrocarbons in Solid-State Membrane Reactors at High Temperatures

Single-step methane to methanol over lanthanum cerium oxide: The crucial role of surface reactive oxygen and carbonate species

Characterization of Nanosized SrTiO_3 Catalyst for Oxidative Coupling of Methane by in Situ ESR and TPSR

Enhancing electrochemical methane coupling in solid oxide cells by tuning oxygen species in the catalyst

Active oxygen center in oxidative coupling of methane on La2O3 catalyst

Partial oxidation of ethane to syngas in an oxygen-permeable membrane reactor