Abstract:The aim of this study was to simulate the solidification process of beam blank continuous casting, and then find the reasons for the typical defects of the beam blank. A two-dimensional transient coupled finite element model has been developed to compute the temperature and stress profile in beam blank continuous casting. The enthalpy method was used in the heat conduction equation. The thermo-mechanical property in the mushy zone was taken into consideration in this calculation. It is shown that at the mold exit the thickness of the shell had its maximum value at the flange tip and its minimum value at the fillet. The temperature had a great fluctuation on the surface of the beam blank in the secondary cooling zone. At the unbending point, the surface temperature of the web was in the brittleness temperature range under the present condition. To ensure the quality, it is necessary to weaken the intensity of secondary cooling. At the mold exit the equivalent stress and strain have higher values at the flange tip and at the web. From the spray 1 to the unbending point, the maximum values of stress and strain gradually moved to the internal section of the flange tip and the web. However, whenever, there were bigger stress and strain values near the flange tip and the web than in the other parts, it must be very easy to generate cracks at those positions. Now, online verification of this simulation has been developed, which has proved to be very useful and efficient to instruct the practical production of beam blank continuous casting.

Progress of Numerical Simulation in Molten Zinc Bath of Continuous Hot-dip Galvanizing Line

Numerical Simulation of Zinc Dross Diffusion in a Continuous Hot Dip Galvanized Zinc Pot under the Industrial Production Condition

The Study Development of Corrosion in Molten Zinc Bath

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

Progress in numerical simulation of casting process

Numerical Simulation and Experiments Research on Secondary Cooling Process of Thick Slab Continuous Casting

Progress in numerical simulation of solidification process of shaped casting

Numerical Simulation of Solidification and Heat Transfer in Continuously Cast Bloom

Numerical Simulation of Molten Pool and Control Strategy of Kiss Point in a Twin-Roll Strip Casting Process

Numerical simulation analysis of thermal stress fields during solidification of steel casting

Numerical Simulation on the Temperature Distribution in Spot Welding

Numerical Simulation of the Thermo-Mechanical Process for Beam Blank Continuous Casting

Numerical Simulation of Spot Welding for Galvanised Sheet Steels

Numerical simulation on flow and heat transfer in twin roll strip casting and rolling molten pool with side dams vibrating

Simulation and application of dynamic heat transfer model for improvement of continuous casting process

Numerical Simulation of Macrosegregation in Cast-steel Ingot

Numerical Analysis of Two-phase Flow and Heat Transfer in External Cyclic Purification Hot-dip Galvanizing Bath

Numerical Methods to Improve the Computational Efficiency of Solidification Simulation for the Investment Casting Process

Numerical simulation of GTAW for ZW61 magnesium alloy thin plates: Coupling the finite element method with the cellular automata method

PROGRESS OF SOLIDIFICATION SIMULATION FOR CONTINUOUS CASTING

Numerical Simulation of Centerline Segregation in Continuous Casting Billet