Abstract:Experimental investigations on the flow boiling heat transfer characteristics of high-pressure water are carried out in parallel twin narrow rectangular channels. An integrated structure was utilized to define the geometry of the test section in this study. The cross-sectional size of a single channel measures 60 × 2 mm, with an effective heating and flow length of 1450 mm. Experiments encompass a range of pressures 10–16 MPa, mass flux 500–1500 kg m −2 ·s −1 and heat flux 100–300 kW m −2 . First, the heat transfer characteristics in the parallel twin channels are determined. Results show the heat transfer and flow distribution between the twin channels are generally balanced, with only a slight fluctuation observed near the saturation point. Besides, for one narrow rectangular channel, the boiling heat transfer coefficient is found to be essentially affected by the system parameters. The increases in mass flux, heat flux, and pressure will all exert the promotion of boiling enhancement. Among these factors, pressure and heat flux have a relatively more pronounced impact. In addition, heat transfer mechanisms in narrow rectangular channel with a large aspect ratio under high-pressure conditions are analyzed in detail. The transverse buoyancy effect has been identified as a significant factor in the regions of single-phase forced convection and partial subcooled boiling. Once the heat transfer reaches the stage dominated by nucleate boiling, the bubble nucleation and motion behaviors constitute the primary factors of heat transfer enhancement, under the coupling effects of channel structure and high-pressure conditions.

COMPARISON STUDY OF FLOW AND HEAT TRANSFER CHARACTERISTICS IN TWO KINDS OF WAVY CHANNELS

Observation of Heat Transfer in Oscillating Flow Within A Circular Channel

Similarity criterions of heat transfer for oscillating flow

Impact of Peclet number on heat transfer of oscillatory flow in circular channel

Flow and Heat Transfer Analysis of Perforated Fin in Compact Heat Exchanger

Numerical Study on Performances of Mini-Channel Heat Sinks with Non-Uniform Inlets

Study of Heat Conduction Transfer Functions of Fins

Forced Heat Convection of Wavy Fin Channel

EXPERIMENTAL AND NUMERICAL INVESTIGATION ON THE HEAT TRANSFER ENHANCEMENT USING LONGITUDINAL VORTICES IN NARROW-CHANNELS

Numerical Investigation of Fluid Flow and Heat Transfer in High-Temperature Wavy Microchannels with Different Shaped Fins Cooled by Liquid Metal

Numerical investigation and mechanism analysis of heat transfer enhancement in a helical tube by square wave pulsating flow

EXPERIMENT ON TWO-PHASE CRITICAL FLOW THROUGH NARROW CHANNELS

Fluid Flow and Conjugate Heat Transfer in a Channel with Inflow from a Porous Wall

Numerical study on the effect of a parallel to the flow barrier on the flow and heat transfer characteristics of a symmetric sinusoidal channels

Numerical Investigation on Two-Phase Flow Heat Transfer Performance and Instability with Discrete Heat Sources in Parallel Channels

Numerical investigation of flow and heat transfer characteristics in smooth, sinusoidal and zigzag-shaped microchannel with and without nanofluid

Flow boiling heat transfer characteristics and mechanism analysis of high-pressure water in parallel twin narrow rectangular channels

Experimental and Numerical Analysis on Heat Transfer Performance of Slug Flow in Rectangular Microchannel

Numerical Simulation of Laminar Flow and Heat Transfer Characteristics in Elliptical Tubes

Numerical Analysis of Flow Boiling Characteristics of a Single Channel Heat Sink Subjected to Multiple Heat Sources

FLOW AND HEAT TRANSFER CHARACTERISTICS IN NANOFLUID OSCILLATING HEAT PIPES