Abstract:This study presents a hybrid method of three-dimensional computational fluid dynamics (CFD) commercial software and inverse method along with experimental data and various flow models to study the natural convection heat transfer and fluid flow characteristics of vertical annular elliptical finned tube heat exchangers for various fin spacings. The inverse method of the finite difference method along with the experimental temperature data is first applied to estimate the heat transfer coefficient on the fins. After that, CFD along with various flow models and estimated heat transfer coefficients are used to determine air temperature and air velocity profiles, fin surface temperature and heat transfer coefficient on the fins. More accurate numerical results, appropriate flow model and number of grid points, number of iterations and relative convergence criteria can be obtained when the resulting heat transfer coefficient and fin temperature are as close as possible to the inverse results and experimental temperature measurements, respectively. The results show that the zero-equation turbulence model is more suitable for this study than other flow models. The choice of relative convergence criteria, number of iterations and grid points are important for obtaining more accurate results. The commercial software version, the relative convergence criteria for momentum and energy equations, the number of iterations and the N-t value vary with the fin spacing. The effect of the round-off error on the numerical results obtained needs to be considered. The heat transfer coefficient increases with increasing fin spacing and approaches a constant. The best fin spacing is about 18 mm. The fin efficiency of the annular elliptical fins is higher than that of the annular circular fins. The proposed correlations between Nusselt number and Rayleigh number is in good agreement with the numerical and inverse results obtained. (C) 2018 Elsevier Ltd. All rights reserved.

Numerical Simulation of Laminar Flow and Heat Transfer Characteristics in Elliptical Tubes

Simulation And Analysis On Heat Transfer In Laminar Oscillatory Flow In-Tube

A Study on Heat Transfer and Flow Resistance Characteristics in Elliptical Tubes

Numerical Study On Low Reynolds Number Heat Transfer In Alternating Elliptical Axis Tube

Analysis of Flow and Heat Transfer Characteristics Around Oval-Shaped Cylinder

Numerical Prediction of Transitional Features of Turbulent Forced Gas Flows in Circular Tubes with Strong Heating

LAMINAR FLOW AND HEAT TRANSFER IN THE DEVELOPING REGION OF HELICAL SQUARE DUCTS

Numerical Computations on Flow and Heat Transfer Characteristics of a Helically Coiled Heat Exchanger Using Different Turbulence Models

Study on Flow Field in an Elbow Draft Tube by 3D Numerical Simulation

NUMERICAL ANALYSIS OF LAMINAR FLOW AND HEAT TRANSFER IN TWISTED ELLIPTIC TUBES

Numerical Simulation of Natural Convection Heat Transfer for Annular Elliptical Finned Tube Heat Exchanger with Experimental Data

Numerical Simulation of Taylor Flow in Micro Circular Tubes

Numerical Simulation of Laminar Flow in Various Curved Pipes Using a Boundary-Fitted Coordinate System.

Experimental Study on Convective Heat Transfer in Alternating Elliptical Axis Tubes

Numerical analysis of heat transfer characteristics of helium flow cross helically coiled tube bundle

Numerical Simulation and Optimization of Enhanced Heat Transfer in Helical Oval Tubes: Effect of Helical Oval Tube Modification, Pitch Ratio, and Depth Ratio

Numerical investigation of laminar natural convective heat transfer from a horizontal triangular cylinder to its concentric cylindrical enclosure

Heat transfer simulation of annular elliptical fin-and-tube heat exchanger by transition SST model

Numerical–Theoretical Analysis of Heat Transfer, Pressure Drop, and Fouling in Internal Helically Ribbed Tubes of Different Geometries

Numerical Simulation of Heat Transfer in Finned Tube of Heat Recovery Unit Using Fluid-Solid Coupled Method

Numerical Study on Low Reynolds Number Convection in Alternate Elliptical Axis Tube