Abstract:This paper numerically investigated the effects of incorporating three distinct vortex-based fluidic oscillators on heat transfer and pressure drop within a two-dimensional channel with constant heat flux at different Reynolds numbers ranging from 10,000 to 50,000. These oscillators consist of primary and secondary chambers connected by a throat and a return channel. The dimensions of the base vortex-based fluidic oscillators were halved to design the second oscillator while keeping the inlet and outlet throats unchanged to reduce pressure drop across the oscillator. Finally, a protrusion was incorporated into the wall profile of the second oscillator, intensifying the vortex in the secondary chamber and augmenting the transverse oscillation amplitude to boost heat transfer. The finite volume method with the k–ω shear-stress transport (SST) turbulence model was used to solve the Unsteady Reynolds-Averaged Navier–Stokes (URANS) equations and energy transport. Transient numerical results demonstrated intensified jet oscillations in the channel, enhancing heat transfer, particularly at the inlet zones of the channel owing to vigorous collisions with upper and lower channel walls. The time-averaged numerical results indicated that the first, second, and third oscillators respectively raised the average Nusselt number of the channel by 40%, 21%, and 24% at X/D = 5. Similarly, at X/D = 10, the oscillators led to increases of 22%, 9%, and 11 %, compared to the simple channel without oscillators. The small-size second and third oscillators also increased the performance evaluation criterion (PEC) compared to the base vortex-based fluidic oscillator. The maximum PEC values were 0.95 for the base oscillator, 1 for the second oscillator, and 0.98 for the third oscillator at Re = 10,000. These oscillators can be used as inserts for enhancing heat transfer in channels.

Impact of Peclet number on heat transfer of oscillatory flow in circular channel

Observation of Heat Transfer in Oscillating Flow Within A Circular Channel

Simulation And Analysis On Heat Transfer In Laminar Oscillatory Flow In-Tube

Numerical Study of Laminar Pulsating Flow in a Channel

Numerical Analysis of Mixed Convective Heat Transfer In a Square Channel with Uniform Wall Temperature.

Numerical Analysis on Heat Transfer Performance of Oscillating Flow in Wavy Channel

Numerical Simulation of Thermal Enhancement in Pulsating Inflow Grooved Channel Based on Hydrodynamic Instability

Numerical investigation on slip-flow and heat transfer characteristics in the entrance region of elliptical microchannels

Numerical investigation of heat transfer and fluid flow characteristics inside a wavy channel

Simulation of gas flow and heat transfer in micro Poiseuille flow

Numerical investigation and mechanism analysis of heat transfer enhancement in a helical tube by square wave pulsating flow

Numerical Study Of Flow And Heat Transfer In Rectangular Channel With Periodic Longitudinal Vortex Generators Under Pulsating Flow

Numerical Investigation on Flow and Heat Transfer of Pulsating Flow in Various Ribbed Channels

Simultaneously developing flow and heat transfer in circular and parallel-plates microchannels with velocity slip and temperature jump

Heat Transfer with Laminar Pulsating Flow in a Channel or Tube in Rolling Motion

Heat transfer enhancement of a channel via vortex-based fluidic oscillator: A numerical study

Numerical Study of the Flow and Heat Transfer of a Rectangular-tube Turbulent Impinging Jet Flow

Numerical study on effect of oscillation center position on heat transfer and flow internal tube

Numerical Investigation and Parameter Sensitivity Analysis on Flow and Heat Transfer Performance of Jet Array Impingement Cooling in a Quasi-Leading-Edge Channel

Numerical Simulation of Turbulent Pulsating Flow and Heat Transfer in Tubes

Numerical Investigation of Thermally Developing Non-Darcy Forced Convection in a Porous Circular Duct with Asymmetric Entrance Temperature under LTNE Condition