Abstract:Single-walled carbon nanotubes (SWNTs) have attracted much attention due to their unique structural, mechanical, chemical, and electrical properties. Catalytic chemical vapor deposition (CCVD) through decomposition of hydrocarbons is one of the most challenging synthesis methods to produce SWNTs in large scale. In this paper, high quality SWNTs prepared in a nano-agglomerated fluidized bed reactor (NAFBR) was reported. The reactor is a vertical quartz tube with the inner diameter of about 50 mm. Catalysts nanoparticles used for the production of SWNTs were prepared with Fe metal nanoparticles carried on the surface of MgO. About 150g catalysts powders were loaded on the gas distribution grid. The reaction temperature was controlled at not less than 1123 K. The carrier gas of argon was used to maintain turbulent fluidization of the catalysts powders in FBR. The hydrogen gas was used to reduce the catalysts and to synergize the growth of SWNTs with methane. The powder products were spherical agglomerates of SWNTs bundles tangling with the catalysts particles. By optimizing the process parameters of CCVD, the products of SWNTs with the diameter about 0.9 ∼ 1.8 nm were prepared, without any multi-walled carbon nanotubes (MWNTs) or amorphous carbon. The microstructure of SWNTs products were characterized by the methods of high resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), Raman spectra, etc. The NAFBR is a commercially viable (effective and continuous production at a low cost) process for the production of SWNTs.

Production of Single-Wall Carbon Nanotubes at High Pressure

Large Scale Synthesis of Single-Wall Carbon Nanotubes by Arc-Discharge Method

Synthesis Of Large Quantity Single-Walled Carbon Nanotubes By Arc Discharge

Growth Of High-Quality Single-Wall Carbon Nanotubes Without Amorphous Carbon Formation

Water-Assisted Preparation of High-Purity Semiconducting (14,4) Carbon Nanotubes

Nano-polycrystalline diamond formation under ultra-high pressure

A Novel Method to Produce Large Amount Single-Walled Carbon Nanotubes by Arc Discharging

A New Method to Fabricate Large Amount of Single-Walled Carbon Nanotubes

Pressure Effects on Nanotubes Formation Using the Submerged Arc in Water Method

Mass-production of single-wall carbon nanotubes by arc discharge method

Thin-Film Metal Catalyst For The Production Of Multi-Wall And Single-Wall Carbon Nanotubes

Mass-production of Single-Wall Carbon Nanotubes by Arc Discharge Method11this Work Was Supported by the National Natural Science Foundation of China, No. 29671030.

Purification of Single-Wall Carbon Nanotubes

Influence of Cerium Metal As Catalyst on the Growth and Structure of Single-Walled Carbon Nanotubes

A Single‐Step Process to Produce Carbon Nanotube‐Zinc Compound Hybrid Materials

An Efficient Method to Produce Single-Walled Carbon Nanotubes by Round-Trip Arc Discharge

Preparation of Large Amounts of Carbon Nanotubes in Hydrogen Atmosphere by Arc-Discharge

Mass Production of High-Quality Multi-Walled Carbon Nanotube Bundles on a Ni/Mo/MgO Catalyst

Production of High Quality Single-Walled Carbon Nanotubes in a Nano-Agglomerated Fluidized Bed Reactor

Towards the preparation of single-walled carbon nanotubes with average diameter of 1.2 nm

Single-Wall Carbon Nanotubes Synthesized by Laser Ablation in A Nitrogen Atmosphere