Abstract: Over the last one and a half decades, a great amount of research on the synthesis of carbon nanotubes has been carried out [1–5] since the first pioneering report of the discovery of multiwalled carbon nanotubes (MWCNTs) by Iijima [6]. Carbon nanotubes (CNTs) are generally produced by three main techniques: arc discharge, chemical vapor deposition (CVD), and laser ablation, although scientists are researching more economic ways to produce these structures. In arc discharge, a vapor is created by an arc discharge between two carbon electrodes with or without catalyst. Nanotubes self-assemble from the resulting carbon vapor. CVD synthesis is achieved by putting a carbon source in the gas phase and using an energy source, such as plasma or a resistively heated coil, to transfer energy to a reactive gaseous carbon molecule. This reactive carbon will deposit and grow on the catalyst (usually a first row transition metal such as Ni, Fe, or Co). The CVD method can result in MWCNTs or single-walled carbon nanotubes (SWCNTs). The CVD method is easy to scale up, which favors commercial production. For the laser ablation method, a mixture of carbon and transition metals such as Co and Ni is vaporized directly by a laser impinging on a metal–graphite composite target. In contrast to the arc discharge method, direct vaporization allows a far greater control over growth conditions, permitting continuous operation and preparation of nanotubes in higher quality. The laser ablation method tends to produce a small amount of clean nanotubes, whereas the arc discharge method generally produces larger quantities of nanotubes but also much more impurity.

Single-Wall Carbon Nanotubes Synthesized by Laser Ablation in A Nitrogen Atmosphere

Formation of Single-Wall Carbon Nanotubes by Laser Ablation of Fullerenes at Low Temperature

Large‐Scale Synthesis of Rings of Bundled Single‐Walled Carbon Nanotubes by Floating Chemical Vapor Deposition

Heterogeneous Growth Of B-C-N Nanotubes By Laser Ablation

Growth Of High-Quality Single-Wall Carbon Nanotubes Without Amorphous Carbon Formation

Synthesis of C3N4+ by the Combination of Laser Ablation of Graphite and N2 Molecular Beam

Synthesis of Carbon Nano-Tubes by Pulsed Laser Ablation at Normal Pressure in Metal Nano-Sol

Cobalt-catalysed growth of carbon nanotubes with single-atomic-layer walls

Generation and Deposition of Fullerene- and Nanotube-Rich Carbon Thin Films

Synthesis Of Large Quantity Single-Walled Carbon Nanotubes By Arc Discharge

Synthesis of Cnx Nanocrystals and Nanotubes on Co/Ni-Covered Substrate by Nitrogen-Atom-Beam-Assisted Pulsed Laser Ablation

Uniform Patterned Growth of Carbon Nanotubes Without Surface Carbon

A Single‐Step Process to Produce Carbon Nanotube‐Zinc Compound Hybrid Materials

Production of Single-Wall Carbon Nanotubes at High Pressure

Influence of NH3 Atmosphere on the Growth and Structures of Carbon Nanotubes Synthesized by the Arc-Discharge Method

Synthesis and Purification of Carbon Nanotubes

Catalytic Growth of Single-Walled Manotubes by Laser Vaporization

Production of Carbon Nanostructures by Co2-Laser Irradiating Graphite

Structure modification of single-wall carbon nanotubes

Nitrogen-doped carbon nanotubes synthesized with carbon nanotubes as catalyst

Synthesis of Boron Nitride Nanotubes by Means of Excimer Laser Ablation at High Temperature