Abstract:This paper presents the design and measurement of an IEEE 802.11ad standard compatible RF transceiver for 60 GHz wireless communication systems. In addition to the traditional half-duplex (HD) mode, this work supports full-duplex (FD) operations to deliver better channel utilization and faster response times for the system. The isolation between the transmitter and receiver from the architecture design to system integration for FD operations has been fully considered. A digital self-interference cancellation (DSIC) is implemented in MATLAB to verify the FD performance. The super-heterodyne architecture with an intermediate frequency (IF) of 12 GHz is designed to suppress the image frequencies without using extra filters. A flexible phase-locked loop (PLL) synthesizer provides a local oscillator (LO) frequency with a 2 kHz resolution. Other than the time division duplex (TDD) mode used in the conventional 60 GHz system, a wide-bandwidth baseband digital variable-gain amplifier (DVGA) with a 3 dB bandwidth of more than 4 GHz also supports frequency division duplex (FDD) operations. The transceiver chip is fabricated using the Tower Jazz 0.18 μm SiGe BiCMOS process. With an on-board antenna, the transceiver covers all four channels in the 802.11ad standard, with MCS-12 (7.04 Gbps under 1.76 GSym/s and 16-QAM) under 1.5 m. In the proposed system design, the RF frontend-based self-interference (SI) suppression from the local transmitter to receiver LNA is around 54 dB. To achieve a practical FD application, the SI is further suppressed with the help of a digital SI compensation. The measured power consumption for the transmitter and receiver configurations are 194 mW and 231 mW, respectively, in HD mode and 398 mW for the FDD or FD operation mode.

700mhz Rf Transceiver Of Base Station For 802.16e

Rf Transceiver Of Wimax Base Station For 802.16d

A compact dual-band direct-conversion CMOS transceiver for 802.11a/b/g WLAN

A Compact 2-18Ghz Ultra-Wideband Frequency-conversion T/R Module Based on a 3D Heterogeneous Integrated Process

A 0.7-8 GHz High IF Frequency-Extended Transmitter Front-End with −47.1-Db EVM at 16 QAM in 65-Nm CMOS

An RF/baseband FDMA-interconnect Transceiver for Reconfigurable Multiple Access Chip-to-chip Communication

Rf Transmitter Architecture Investigation for Power Efficient Mobile Wimax Applications

A 2.4 GHz 0.18 Μm CMOS Transmitter for IEEE 802.11b Wireless LAN

A 2.4-Ghz Fully CMOS Integrated Transmitter for 802.1lb Wireless LAN

A New 24/36-Ghz Transceiver Architecture for 60-Ghz Applications

Design of a Software-Defined Transceiver with High Flexibility for Sensing Applications

A Full-Duplex 60 GHz Transceiver with Digital Self-Interference Cancellation

A Highly Integrated Energy-efficient CMOS Millimeter-wave Transceiver with Direct-modulation Digital Transmitter, Quadrature Phased-coupled Frequency Synthesizer and Substrate-Integrated Waveguide E-shaped Patch Antenna

A Baseband Transceiver for Multi-Mode and Multi-Band SoC.

An Energy-Efficient 10-Gb/s CMOS Millimeter-Wave Transceiver with Direct-Modulation Digital Transmitter and I/Q Phase-Coupled Frequency Synthesizer

A Fully Integrated CMOS 60-Ghz Transceiver for IEEE802.11ad Applications.

A Bidirectional 56-72 GHz to 10.56 GHz Tranceiver Front-End with Integrated T/R Switches in 28-nm CMOS Technology

A Highly Reconfigurable 65nm Cmos Rf-To-Bits Transceiver For Full-Band Multicarrier Tdd/Fdd 2g/3g/4g/5g Macro Basestations

A 6.5–8.1-Ghz Communication/Ranging VWB Transceiver for Secure Wireless Connectivity with Enhanced Bandwidth Efficiency and $\delta\sigma$ Energy Detection

A 900mhz Uhf Rfid Reader Transceiver in 0.18 Mu M Cmos Technology

A Fully Integrated CMOS Transceiver for Mobile UHF RFID Reader