Abstract:In the present manuscript, a simple hydrometallurgy process for recovering and recycling cobalt from spent lithium cobalt oxide LiCoO2 (LCO) in lithium-ion batteries (LIBs) is described. First, the black material (BM) containing LCO active material is extracted by discharging, dismantling and detachment of cathode active materials with an organic solvent. Then, sulfuric acid (H2SO4) and hydrogen peroxide (H2O2) are used to fully dissolve Co and Li in an aqueous solution at high dissolution efficiency (more than 99% of Li and Co). After a purification step, Co is selectively precipitated and separated from Li, as CoCO3, using a simple method. Results show that the obtained CoCO3 crystals have a unique sheets-like structure with a purity of more than 97% and could be reused to regenerate LCO active material for LIB. The as-prepared sheet-like CoCO3 was then converted to flower-like LCO through a solid-state reaction with commercial lithium carbonate (Li2CO3). Electrochemical performances of the regenerated LCO (LCOReg) in LIB have been studied. Interestingly, the flower-like LCOReg showed a good charge capacity of about 145 mAh.g−1 at the first cycle, compared to LCO synthesized from commercial cobalt and lithium precursors (LCOCom). Specific charge capacity and columbic efficiency also remained relatively stable after 60 charge/discharge cycles. The proposed recycling process of Co in the present work doesn’t require the use of the complicated and expensive solvent extraction method and thus it is simple, cost-effective, environmentally-friendly and could be used for recovering high purity critical metals such as Co and Li from spent LIBs at the industrial scale.

Process for the Recovery of Cobalt Oxalate from Spent Lithium-Ion Batteries

Novel Approach to Recover Cobalt and Lithium from Spent Lithium-Ion Battery Using Oxalic Acid.

Ascorbic-acid-assisted Recovery of Cobalt and Lithium from Spent Li-ion Batteries

A Combined Recovery Process Of Metals In Spent Lithium-Ion Batteries

Recovery of Valuable Metals from Cathode—Anode Mixed Materials of Spent Lithium-Ion Batteries Using Organic Acids

A Simplified Process for Recovery of Li and Co from Spent LiCoO2 Cathode Using Al Foil As the in Situ Reductant

Succinic Acid-Based Leaching System: A Sustainable Process for Recovery of Valuable Metals from Spent Li-ion Batteries

Recovery of spent LiCoO2 lithium-ion battery via environmentally friendly pyrolysis and hydrometallurgical leaching

Efficient recovery of lithium as Li2CO3 and cobalt as Co3O4 from spent lithium-ion batteries after leaching with p-toluene sulfonic acid

Extraction of Co and Li2CO3 from cathode materials of spent lithium-ion batteries through a combined acid-leaching and electro-deoxidation approach

Recovery of valuable metals from spent lithium-ion batteries by ultrasonic-assisted leaching process

Stepwise Recovery Of Valuable Metals From Spent Lithium Ion Batteries By Controllable Reduction And Selective Leaching And Precipitation

Efficient extraction of valuable metals from spent LiNi0.5Co0.2Mn0.3O2 cathode based on an acid-free leaching process

A combined process for cobalt recovering and cathode material regeneration from spent LiCoO2 batteries: Process optimization and kinetics aspects

Effective leaching of spent lithium-ion batteries using DL-lactic acid as lixiviant and selective separation of metals through precipitation and solvent extraction

Recovery of Nickel and Cobalt Metal Powders from the Leaching Solution of Spent Lithium-Ion Battery by Solvent Extraction and Chemical Reduction

Highly Selective Extraction of Lithium from Spent NCM Cathode Powder Reconstructive Electrode by Acid-Free Electrochemical Process

Synthesis and Recyclability of Sheet-like Cobalt Carbonate Recovered from Spent Li-Ion Batteries Using a Simple Hydrometallurgy Process

Novel electrochemical process for recycling of valuable metals from spent lithium-ion batteries

Recovery of High-Purity Lithium Compounds from the Dust of the Smelting Reduction Process for Spent Lithium-Ion Batteries

Converting spent lithium cobalt oxide battery cathode materials into high-value products via a mechanochemical extraction and thermal reduction route