Abstract:A no-insulation (NI) REBCO superconducting magnet is under development at Wuhan National High Magnetic Field Center, China. The magnet with the liquid helium cryostat system has a compact structure to reduce the space required for operation. During a quench, the fast-changing spatial magnetic field around the NI magnet may induce a strong eddy current in the conductive parts of the cryostat. The eddy current and its associated Lorentz force will generate mechanical stress on the cryostat, especially on the thermal shield (TS). The mechanical strength of the cryostat needs verification in the preliminary design. Furthermore, the degree to which the electromagnetic coupling between the cryostat and NI magnet might impact the quench behaviors of the NI magnet remains uncertain. In this paper, a multi-physics quench model is newly developed for the NI REBCO magnet, and the alternating direction implicit method is employed for the solver of the thermal model to improve computational efficiency. This simulation model can consider the electromagnetic coupling effect between the NI magnet and cryostat by constructing a partial element equivalent circuit. A quench analysis has been performed and we found that: (1) The cryostat can function as a secondary shorted circuit to the NI magnet and slow down the quench speed to a certain extent. (2) During the rather fast inductive quench phase, the cryostat will experience an attraction force towards the quench propagation frontier. (3) A quench propagation from one end of the magnet can cause a significant z-axis unbalanced force on the TS. (4) Cryostat materials with drastically changed electrical conductivity can significantly affect their mechanical responses during a quench. However, the eddy current density and maximum Von Mises stress on the TS are barely affected by the thickness of the TS and the contact resistance of the NI REBCO magnet.

Analysis of helium discharging process after quench of superconducting magnet system

The Study on the Quench Helium Release Process of HFRS Superconducting Magnet

Helium Boil-Off Experiments For A Superconducting Magnet Cryostat With Pulse Tube Cryocooler

Numerical Study on the Flow and Heat Transfer Characteristics in CFETR Cryostat During a Loss of Vacuum

Study on Helium Gas Bubble Levitation in High Field Superconducting Magnet

Calculation and Analysis of Several Methods of Obtaining 1.8 K Superfluid Helium

Numerical and Experimental Study for the Quench Propagation of A Test Superconducting Magnet

Thermal Analysis of a Head-Only 1.5 T Magnetic Resonance Imaging Superconducting Magnet

Quench Analysis and Improvement of a Semi-Open Split NbTi Superconducting Magnet With Large Inductance

Analysis of 1.8 K Superfluid Helium Cryogenic System for Cooling Superconducting Magnets

Study on Forced Flow Cooling of Superconducting Magnet for Compact Synchrotron

Flow and Heat Transfer Characteristics of Supercritical Helium for Magnet Cooling

Thermal analysis of conduction-cooled superconducting magnet system based on ANSYS

Stability Study on the HT-7U TF and PF Superconducting Magnets

Numerical Model for Thermal Hydraulic Analysis in Cable-In-Conduit-Conductors

Study on flow characteristics of the cryogenic throttle valve for superfluid helium system

Helium leakage inspection method based on conservation of mass

Quench Analysis of a No-Insulation REBCO Magnet Based on the ADI Method Considering the Coupling Effect of the Cryostat

Quench Protection Design of a 1.5 T Superconducting MRI Magnet

Analysis of Cooling System of Active Magnetic Bearing of HTGR Power Conversion Unit

Heat losses analysis of a 7T superconducting magnet for animal MRI