Abstract:A cable-in-conduit-conductor (CICC) consists of superconducting cable, copper, supercritical helium and conduit. To keep the operating temperature of superconducting cable lower than its current sharing temperature, the supercritical helium is forced flow through the CICC. The supercritical helium through the cable bundle has the complex directional changes due to the interaction between the supercritical helium and strands. The structure of CICC is characterized with the porous medium. The quench characteristics of CICC are analyzed by the model which the temperature difference between the strands and helium is assumed to be very small due to the heating induced flow to generate high heat transfer coefficient of supercritical helium. A moving mesh method is developed for the numerical solution of the problem with the steep drop for temperature and density of supercritical helium in the short front region of the normal zone. The computational mesh is obtained by equidistribution of a monitor function tailored for the functional variation of the arguments for density, temperature and velocity of supercritical helium. Existence and uniqueness of the discretised equations using a moving mesh are also established. The coupled equation for porous medium is solved using the finite element method with the artificial viscosity term. The validation of the code is tested by comparing it with the other codes with good accuracy. The converged properties of numerical solution due to quench in CICC are studied. We present preliminary estimates of the maximum conductor temperature rise and helium pressure during a quench in the inner layer of toroidal field (TF) magnet for HT-7U. The quench scenarios with different dump time constants of 6.25, 12, and 21.1 s are considered. The goal of such work is to guide the protection scheme and a detailed prediction of the quench evolution of magnet.

Stability Study on the HT-7U TF and PF Superconducting Magnets

Development of a Conduction-Cooled HTS SMES

FE Stress Analysis of Toroidal Field Magnet System in HT-7U

STABILITY ANALYSIS OF THE HT-7U TF AND PF CONDUCTORS USING THE REVISED CODE GANDALF

Simulation of quench for the cable-in-conduit-conductor in HT-7U superconducting Tokamak magnets using porous medium model

Cryogenic System for the Superconducting Tokamak Ht-7u

Towards Steady-State Operational Design for the Data and PF Control Systems of the HT-7U

Thermal-Hydraulic Analysis of Pf Coils During Plasma Discharges on East

Stability Analysis for Cryocooled Aluminum-Stabilized Superconducting Magnet

Design study of conduction-cooled high temperature superconducting magnet

Dynamic Stabilization by Modulated Toroidal Current on the HT-7 Superconducting Tokamak

Stability Study on Cryocooler-Cooled Superconducting Magnets

Quench Protection Design of an 8-T Magnet Built With Low- and High-Temperature Superconducting Coils

Thermo-mechanical Analysis of the Structure Components of 15 T Magnet in Super-X Facility

Design and Analysis of High Temperature Superconducting Current Leads for CRAFT TF Magnet

Modelling and analysis of quench in the 15-kA HTS conductor

Development of Testing Device for Critical Current Measurements for HTS/LTS

Multiscale modelling on the multi-physical behaviors of high temperature superconducting magnets based on a combined global homogenization and local refinement scheme

Electromagnetic, stress and thermal analysis of the Superconducting Magnet

Quench Analysis and Improvement of a Semi-Open Split NbTi Superconducting Magnet With Large Inductance

Design and Simulation of 1.5 T Conduction-Cooled Superconducting Magnet with Flip-over Capability