Abstract:Gifford–McMahon (GM) cryocoolers are pivotal for maintaining the temperature of MRI magnets, necessitating regular servicing for optimal performance and longevity. This study explores the geometric dimensions and shapes of superconducting magnets utilized in MRI for system cooling. The investigation demonstrates that warm-up time is contingent on heat capacity rather than geometric shapes. As a result, the design of magnets can be customized to specific shapes and sizes in accordance with favorable conditions, given that warm-up time is solely dependent on heat capacity. The primary focus is to deliberately prolong the warm-up time of the magnet relative to the GM cryocooler, consequently minimizing service intervals. Laboratory evaluations explore the use of thermal masses equivalent to MRI magnets, employing typical materials such as copper and aluminum. These masses are cooled to 4 K and then subjected to different heating powers to evaluate warm-up characteristics. Various configurations and shapes of thermal masses are numerically studied for warm-up analysis. Comparative assessments between experimental results and simulations reveal that, for cylindrical thermal masses, 80 W heating power facilitates a 76% reduction in warm-up time compared to 20 W heating across all cases. In the exploration of different geometric thermal masses, aluminum demonstrates a remarkable 35% decrease in warm-up time compared to copper. A noteworthy finding emerges, indicating that warm-up time is contingent on heat capacity rather than geometric shapes. These insights hold substantial relevance, particularly in systems with large thermal capacities, such as superconducting magnets. The study contributes valuable knowledge to the optimization of GM cryocoolers for enhanced MRI magnet performance and extended operational life.

Heat losses analysis of a 7T superconducting magnet for animal MRI

Thermal Analysis of a Head-Only 1.5 T Magnetic Resonance Imaging Superconducting Magnet

Thermal Analysis of the 4 K Cryostat Within a 1.5 T Conduction-Cooled Superconducting Magnet for Whole-body MRI Application

Stress Analysis of a 7 T Actively Shielded Superconducting Magnet for Animal MRI

Protection Circuit and Quench Simulation of a 7 T Superconducting Magnet for Animal MRI

Helium Boil-Off Experiments For A Superconducting Magnet Cryostat With Pulse Tube Cryocooler

Thermal analysis of a 3 T cryogen-free superconducting magnet for electromagnetic property measurement system

Thermal analysis of conduction-cooled superconducting magnet system based on ANSYS

Design, Fabrication and Measurement of a 3 T Cryogen-Free Animal MRI Superconducting Magnet

The Effect of Temperature Dependence of AC Losses in a Bi-2223/Ag Insert of an 8-T Superconducting Magnet

Thermal studies on cryocooler thermal masses from 4 K to 300 K for MRI applications

Thermal Analysis of Persistent Current Switch for Magnetic Resonance Imaging Superconducting Magnet

A Superconducting Magnet System for Whole-Body Metabolism Imaging

Preliminary Mechanical Analysis of a 9.4-T Whole-Body MRI Magnet

A 7-T Actively Shielded Superconducting Magnet for Animal MRI

Development of a 3 T Conduction-Cooled Animal MRI Superconducting Magnet with a 300 Mm Warm Bore

Optimized Design and Electromagnetic-Thermal- Mechanical Analysis of a Toroidal D-Shaped Superconducting Magnet in 5 MW LIQHY-SMES System

Open MRI Magnet with Iron Rings Correcting the Lorentz Force and Field Quality

Numerical Analysis of Mechanical Behavior for a 9.4-T Whole-Body MRI Magnet

Analysis of helium discharging process after quench of superconducting magnet system

Structural Design of a 9.4 T Whole-Body MRI Superconducting Magnet