Abstract:Due to the extensive application of Al-Si alloys in the automotive and aerospace industries as structural components, an understanding of their microstructural formation, such as dendrite and（Al+Si） eutectic, is of great importance to control the desirable microstructure, so as to modify the performance of castings. Since previous major themes of microstructural simulation are dendrite and regular eutectic growth, few efforts have been paid to simulate the irregular eutectic growth. Therefore, a multiphase cellular automaton（CA） model is developed and applied to simulate the time-dependent Al-Si irregular eutectic growth. Prior to model establishment, related experiments were carried out to investigate the influence of cooling rate and Sr modification on the growth of eutectic Si. This CA model incorporates several aspects, including growth algorithms and nucleation criterion, to achieve the competitive and cooperative growth mechanism for nonfaceted-faceted Al-Si irregular eutectic. The growth kinetics considers thermal undercooling, constitutional undercooling, and curvature undercooling, as well as the anisotropic characteristic of eutectic Si growth. The capturing rule takes into account the effects of modification on the silicon growth behaviors.The simulated results indicate that for unmodified alloy, the higher eutectic undercooling results in the higher eutectic growth velocity, and a more refined eutectic microstructure as well as narrower eutectic lamellar spacing. For modified alloy, the eutectic silicon tends to be obvious fibrous morphology and the morphology of eutectic Si is determined by both chemical modifier and cooling rate. The predicted microstructure of Al-7Si alloy under different solidification conditions shows that this proposed model can successfully reproduce both dendrite and eutectic microstructures.

Un-Uniformity of Eutectic Structure in Al-Si Alloy Modified with Antimony

Growth Mechanism of Eutectic Si in Super-Gravity Solidified Al-Si Alloy During Annealing

Effects of Sr Modification on Microstructure of Al-Si Alloy

Super-gravity field assisted homogeneous distribution of sub-micron eutectic Si in Al-Si alloy

Modification mechanism and tensile property of Al-9Si-0.4Mg-0.1Cu alloy

The Effect of Solution Treatment on the Si Particles’ Morphology Evolution and the Thermal Conductivity and Tensile Properties of Sb-Modified Al-8Si-0.6Mg Alloys

INFLUENCE OF ADDITIVE Sr OR Sb ON MODIFICATION OF Al-Si ALLOYS

Experimental Study and Numerical Simulation of Microstructure Evolution in Al-Si Eutectic Solidification Process

Influence of Super-Gravity Coefficient on Spatial Distribution of Solidification Structure in Al-14.5Si Alloys

A numerical study of irregular eutectic in Al-Si alloys under a large undercooling

Synergistic Effect of Strontium and Melt Quenching on the Solidification Microstructure of Hypereutectic Al-Si Alloys

Modification of Eutectic Si in Al–Si Alloys with Eu Addition

Microstructure Evolution and Modification Mechanism of the Ytterbium Modified Al–7.5%Si–0.45%Mg Alloys

Solidification of Undercooled Ag–Cu Eutectic Alloy with the Sb Addition

Microstructural Evolution in As-Cast Hypereutectic Al-Si Alloys with Different La Additions

Modeling of Aluminum-Silicon Irregular Eutectic Growth by Cellular Automaton Model

Microstructure and Crystallization Evolution of Directionally Solidified Al–Cu–Si Alloys With the Assistance of a Static Magnetic Field

Microstructure Evolution in Undercooled Ni-Si Melt

Synergistic effect of Gd and Sr on the microstructure and mechanical properties of Al–Si–Mg alloy

Effects of Refinement and Modification on Melt Structure of Hypoeutectic Al-Si Alloy

Heterogeneous Nucleation of Mg2Si on Sr11Sb10 Nucleus in Mg–x(3.5, 5 Wt.%)si–1al Alloys