Abstract:Frequency-modulated continuous-wave (FMCW) laser interferometry technology holds significant potential for applications in the fields of ultraprecision manufacturing and high-precision sensing. This paper proposes a novel approach among current phase demodulation methods is based on cross-correlation to address the challenge of this technology. On the basis of nonlinear correction of a distributed feedback (DFB) laser, the intercepted beat frequency signal was first preprocessed with Z-score signal normalization and a smoothing filter. Subsequently, the interference beat signal was subjected to processing using a correlation method to derive the correlation function. Finally, the phase difference between adjacent beat signals was determined by pinpointing the maximum value of the cross-correlation function, enabling accurate displacement demodulation. Experimental validation was performed by constructing an FMCW laser interferometric displacement measurement system. The results indicated that the standard deviation of the displacement error for the cross-correlation method was 2.41 nm during static measurements. Compared to conventional maximum-point method, the static measurement error of the cross-correlation method has been reduced by 1.43 times. In dynamic measurements in the 500 μm range, The measurement error of the cross-correlation method has been reduced by 6.04 times, avoiding the dynamic measurement positioning problem of conventional feature point demodulation methods and making the measurement results more accurate. This advancement holds substantial practical value in the realm of phase demodulation in laser interferometry.

A Measurement Method for a CW Laser Modulation Spectrum Based on Optical Beat Frequency

Self-referencing a continuous-wave laser with electro-optic modulation

A PM-based Approach for Doppler Frequency Shift Measurement and Direction Discrimination

A Time Difference Method for Measurement of Phase Shift between Distributed Feedback Laser Diode (DFB-LD) Output Wavelength and Intensity

Spectral Measurement Method for Stability of Pulse Laser Frequency

Instantaneous Microwave Frequency Measurement Using an Optical Phase Modulator

Model Analysis for Optical Frequency Comb Faraday Modulation Rotation Spectroscopy.

Measurement of the phase shift between intensity and frequency modulations within DFB-LD and its influences on PGC demodulation in a fiber-optic sensor system.

High resolution optical spectrum measurement based on stimulated Brillouin scattering using DFB lasers

Optical Frequency Comb Faraday Modulation Rotation Spectroscopy

Frequency-Modulated Continuous-Wave Laser Interferometry Measurement Method Based on Cross-Correlation

Precise Laser Frequency Measurement of Weak Power with Sub-megahertz Linewidth

Dynamic Frequency-Noise Spectrum Measurement for a Frequency-Swept DFB Laser with Short-Delayed Self-Heterodyne Method.

Enhancing the signal-to-noise ratio of optical frequency beating using open-loop photonic crystal fiber

Dual-Wavelength FBG Laser Sensor Based on Photonic Generation of Radio Frequency Demodulation Technique

An Instantaneous-wavelength-variation Monitoring System Based on Mach-Zehnder Interferometer for the Wavelength-swept DFB Laser

Power-area Method to Precisely Estimate Laser Linewidth from Its Frequency-Noise Spectrum.

Broadband Instantaneous Multi-Frequency Measurement Based on a Fourier Domain Mode-Locked Laser

Photonics-Based Instantaneous Multi-Parameter Measurement of a Linear Frequency Modulation Microwave Signal

Synchronous measurement of velocity and distance with high resolution based on comb reference common-path interferometric FMCW lidar

Linewidth Rapid Measurement of Narrow Fiber Laser by Spectrum Analyzer