Iso-force rough machining of freeform deep cavities based on volumetric fields
Dong He,Xiangyu Li,Zhaoyu Li,Jiejun Xie,Jiancheng Hao,Yi-Kuen Lee,Pengcheng Hu,Kai Tang
DOI: https://doi.org/10.1016/j.jmapro.2024.09.104
IF: 5.684
2024-10-16
Journal of Manufacturing Processes
Abstract:Complex and deep cavity features are ubiquitous in industrial parts, where the harsh interference condition necessitates the use of multi-axis machining strategy to rough-machine the raw blank, in a layer-by-layer manner. However, as the cavity is deep, the cutting tool is typically very long, which requires that the cutting force be carefully controlled. This brings much complexity for determining the machining layers because the cutting force is closely related to the cutting depth, feed direction, and tool orientation, which are all tangled with each other. Conventionally, roughing layers are typically created using iso-parametric curves of boundary surfaces, resulting in longer tool path length and underutilization of the tool' s cutting capacity (i.e., in most of the cutting time, the cutting force is below the given threshold). In addition, the tool orientation is usually adjusted to satisfy the collision-free condition only after the tool path has already been generated, which may introduce ragged tool postures and undermine the finish-surface quality. In this paper, for an arbitrary complex and deep cavity defined by a tetrahedral mesh, borrowing the concept of the iso-scallop height method, we propose a general iso-force rough milling algorithm that enlarges the layer distance as much as possible under the preset force threshold to fully utilize the tool' s bearing capacity and improve cutting efficiency, which is signified by the generated intrinsic machining layers as well as the smooth and collision-free tool paths. The crux of the algorithm is the establishment of a smooth and initially non-orthogonal volumetric frame field whose base vectors respectively represent the potential machining layer normal, the feed direction, and the tool orientation at every point in the volume of the cavity, tending to the hard constraint of collision-free. A scalar field of the magnitude of the cutting force is then constructed inside the volume, which is iteratively synchronized with the volumetric frame field. The iso-force machining layers are then progressively sliced from the optimized cutting force scalar field, on which iso-contour tool paths are finally planned. Both computer simulation and physical cutting experiments are carried out, and the experimental results give a positive confirmation of the generality and effectiveness of the proposed method.
engineering, manufacturing