Abstract:In this paper, the superposition principle of a heat sink temperature rise is verified based on the mathematical model of a plate-fin heat sink with two mounted heat sources. According to this, the distributed coupling thermal impedance matrix for a heat sink with multiple devices is present, and the equations for calculating the device transient junction temperatures are given. Then methods to extract the heat sink thermal impedance matrix and to measure the Epoxy Molding Compound (EMC) surface temperature of the power Metal Oxide Semiconductor Field Effect Transistor (MOSFET) instead of the junction temperature or device case temperature are proposed. The new thermal impedance model for the power converters in Switched Reluctance Motor (SRM) drivers is implemented in MATLAB/Simulink. The obtained simulation results are validated with experimental results. Compared with the Finite Element Method (FEM) thermal model and the traditional thermal impedance model, the proposed thermal model can provide a high simulation speed with a high accuracy. Finally, the temperature rise distributions of a power converter with two control strategies, the maximum junction temperature rise, the transient temperature rise characteristics, and the thermal coupling effect are discussed.

Comments And Further Results On "A New Critical Formula And Mathematical Model Of Double-Tap Interphase Reactor In A Six-Phase Tap-Changer Diode Rectifier"

Modeling for a Multitap Interphase Reactor in a Multipulse Diode Bridge Rectifier

A NEW PHASE AND AMPLITUDE CONTROL STRATEGY AND MATHMATICS MODEL OF THREE-PHASE VOLTAGE RECTIFIER

Simulation Research on a Novel Rectifier and Its Control Strategies with Functions of Reactive Power Compensation and Harmonic Current Filtering

Optimum Design of Interphase Reactor with Double-Tap Changer Applied to Multipulse Diode Rectifier

An Improved Implementation of Virtual Reactance for Control of Single-phase Inverter

Improved Modeling, Stability Analysis and Resonance Suppression of APF System

A Coupled 3D FEM-Distribute Circuit Model for Numerical Analysis of Small Time Scale Transients of an IGBT based Inverter

A Coupled Circuit-Ambipolar Diffusion Equation Model and Its Solution Methodology for Insulated Gate Bipolar Transistors

A Coupled 3D Finite Element-Circuit Model for the Numerical Analysis of Small Time Scale Transients of an Insulated Gate Bipolar Transistor Power Electronics Device

Integral Equation Technique for the Simulation of Signal Integrity and Power Integrity

A Novel Continuously Adjustable Magnetic-valve Controllable Reactor and Its Modeling

A 2-D Nonlinear Ambipolar Diffusion Equation Model of an IGBT and Its Numerical Solution Methodology

An Alternate Mathematical Model for the Tap Technique for Numerical Integration

Simulation and Analysis of Reactor Fault Distributed Current Based on the Combination of Field and Circuit Models

Effect of Single-Phasing on Multipulse Rectifier with Active Interphase Reactor

Improved Model for Beam–Wave Interaction with Ohmic Losses and Reflections of Sheet Beam Traveling Wave Tubes

A Novel Low Loss Interphase Transformation Technology for Multiphase Rectifier System

A numerical approach for nonlinear transmission line analysis with bidirectional coupling to lumped-element and particle-in-cell models

An Equivalent Circuit And Simulation Analysis Of Magnetically-Saturated Controllable Reactors

Thermal Model For Power Converters Based On Thermal Impedance