Abstract:Ethylene/propylene-random-copolymer (PPR)/clay nanocomposites were prepared by two-stage melt blending. Four types of compatibilizers, including an ethylene-octene copolymer grafted maleic anhydride (POE-g-MA) and three maleic-anhydride-grafted polypropylenes (PP-g-MA) with different melt flow indexes (MFI), were used to improve the dispersion of organic clay in matrix. On the other hand, the effects of organic montmorillonite (OMMT) content on the nanocomposite structure in terms of clay dispersion in PPR matrix, thermal behavior and tensile properties were also studied. The X-ray diffraction (XRD) and transmission electron microscopy (TEM) results show that the organic clay layers are mainly intercalated and partially exfoliated in the nanocomposites. Moreover, a PP-g-MA compatibilizer (compatibilizer B) having high MFI can greatly increase the interlayer spacing of the clay as compared with other compatibilizers. With the introduction of compatibilizer D (POE-g-MA), most of the clays are dispersed into the POE phase, and the shape of the dispersed OMMT appears elliptic, which differs from the strip of PP-g-MA. Compared with virgin PPR, the Young’s modulus of the nanocomposite evidently increases when a compatibilizer C (PP-g-MA) with medium MFI is used. For the nanocomposites with compatibilizer B and C, their crystallinities (X c) increase as compared with that of the virgin PPR. Furthermore, the increase of OMMT loadings presents little effect on the melt temperature (T m) of the PPR/OMMT nanocomposites, and slight effect on their crystallization temperature (T c). Only compatibilizer B can lead to a marked increases in crystallinity and T c of the nanocomposite when the OMMT content is 2 wt%.

Low Density Polyethylene/Clay Nanocomposites Modified by Ethylene Copolymers: Effects of Functionalized Segments on Morphology

Polyethylene/Clay Nanocomposite: Review of the Synthetic Routes and Material Properties

In-situ Synthesis, Thermal and Mechanical Properties of Biobased Poly(ethylene 2,5-Furandicarboxylate)/montmorillonite (PEF/MMT) Nanocomposites

Influence of Clay and Predispersion Method on the Structure and Properties of Polystyrene (ps)‐clay Nanocomposites

Effect of Clay Surfactant Type and Clay Content on the Rheology and Morphology of Uncured Fluoroelastomer/clay Nanocomposites Prepared by Melt‐mixing

Nylon 66/clay nanocomposite structure development in a twin screw extruder

Clay Intercalation and Influence on Flammability and Crystallization Behaviors of POE‐based Nanocomposites

Characterization of polymer-layered silicate (clay) nanocomposites by transmission electron microscopy and X-ray diffraction: A comparative study

Effect of composition distribution on miscibility and co-crystallization phenomena in the blends of low density polyethylene with conventional and metallocene-based ethylene–butene copolymers

POLYETHYLENE OXIDE/MODIFIED LAYERED CLAY NANOCOMPOSITES

Preparation of poly(propylene)/clay layered nanocomposites by melt intercalation from pristine montmorillonite (MMT)

Liquid-crystalline copolyester/clay nanocomposites

Effect of Nanoclay on the Morphological Properties of Ternary PA6/POE-g-MAH/LDPE Blend

Preparation and Flammability Properties of Polyethylene/clay Nanocomposites by Melt Intercalation Method from Na+ Montmorillonite

Preparation of Exfoliated Low-density Polyethylene/Montmorillonite Nanocomposites Through Melt Extrusion

Characterization and modeling of mechanical behavior of polymer/clay nanocomposites

TOUGHENING OF ETHYLENE-PROPYLENE RANDOM COPOLYMER/CLAY NANOCOMPOSITES： COMPARISON OF DIFFERENT COMPATIBILIZERS

Influence of organoclay filler and dicumyl peroxide (DCP) on the properties of the low-density polyethylene (LDPE)/thermoplastic starch (TPS) blend

Effect of Mixing Sequence on Phase Morphology and Mechanical Properties in Polyamide 6/butadiene (core) Styrene Acrylonitrile-G-Maleic Anhydride (shell) Latex/Organoclay Ternary Nanocomposites

Novel Preparation of Poly(propylene)–layered Silicate Nanocomposites

Preparation and thermal stability of polypropylene/montmorillonite nanocomposites