Abstract:Resistive Plate Chambers are used in the ATLAS experiment for the muon trigger and two coordinate measurements in the central region. In preparation for the coming years of LHC running at higher luminosity, besides the New Small Wheel project which is expected to complement the ATLAS muon spectrometer in the endcap regions, a smaller size project, known as BIS78, is being developed with a foreseen installation during the LHC Long Shutdown 2. The BIS78 project will reinforce the fake muon rejection and the selectivity of the muon trigger in the transition region between the ATLAS barrel and end-caps by adding 32 RPC triplets on the edges of the Inner Barrel even sectors (BIS7 and BIS8) as this region is characterized by high rate due to secondary charged tracks generated by beam halo protons and a lack of detector instrumentation. Due to the narrow available space, the project foresees to replace the existing Monitored Drift Tubes, used for the precise position measurement in this area, with muon stations formed by integrated smaller diameter tubes and a new generation of RPCs, capable of withstanding the higher rates and provide a robust standalone muon confirmation. These new RPCs are based on novel design of the gas volume with a thinner gas gap and resistive electrodes, a lower operating voltage and new high gain front-end electronics with respect to the legacy RPCs. Besides the use in Run-3 and onwards, this project is also of particular relevance as a pilot test for the HL-LHC upgrade when an additional full layer of new RPC triplets is expected to complement the full barrel region in the innermost plane. The core of the project is presented, together with a description of the production and the test results. Details on the detector infrastructure and services along with a roadmap towards the final installation and commissioning during the Long Shutdown 2 are also discussed.

Cosmic ray test results on resistive plate chamber for the BESIII experiments

Quality Control And Database On Resistive Plate Chambers For The Besiii Experiment

The BESIII Muon Identification System

Tuning of the Cosmic-Ray Test System of the Besiii Drift Chamber

Cosmic ray test of a prototype of the BESⅢ drift chamber

Cosmic ray test of a prototype of the BESIII drift chamber

Study of BESIII MUC Offline Software with Cosmic-Ray Data

Installation and Cosmic Ray Test of the High Voltage System of the BESIII Drift Chamber

The cosmics rays quality test procedure for the CMS barrel resistive plate chambers

Test of BESIII RPC in the Avalanche Mode

Cosmic Ray Test On Csi(Tl) Modules Of Besii Electromagnetic Calorimeter

The Installation Of Cosmic-Ray Testing System And The Test Of Resistive Plate Chamber

Calibration of RPC-based muon detector at BESIII

Quality control and batch testing of MRPC modules for BESIII ETOF upgrade

Resistive Plate Chambers for Muon Detection at LHC

Construction of A Full-Length Prototype of the Besiii Drift Chamber and On-Detector Test for the Besiii Drift Chamber Electronics

A monitor for the composition of the gas mixture of BESIII muon chambers

Position Calculation of Hit in the Cosmic Ray Test of BESIII Drift Chamber

Design and Construction of the BESIII Detector

Test of High Time Resolution Mrpc with Different Readout Modes for the Besiii Upgrade

The BIS78 Resistive Plate Chambers upgrade of the ATLAS Muon Spectrometer for the LHC Run-3