Abstract:Fiber Bragg Gratings (FBG) have great significance in the development of high-power fiber laser systems. Fabrication sources, fibers, and fabrication technology would affect the performance of FBGs directly. In this research, a scanning exposure method for fabricating FBGs in different types of photosensitive fibers with a 213nm solid-state laser source was proposed. The Q-switched Nd: YVO4 laser fifth harmonic source was compared with the traditional excimer lasers and the impacts of lengths, center wavelengths, titled angles, and apodization on the reflection and transmission spectra of FBGs were discussed. The scanning fabrication system, which can realize the tilting of phase mask and the adjustment and monitoring of tension, was built according to the characteristics that the output spot diameter of the fabrication source was sub-millimeter. While the high quality of fabrication was guaranteed, FBGs with lengths of 3mm~20mm, center wavelengths shift of 0nm~4.2nm, and tilted angles of 0~21 were obtained, and all the parameters were simultaneously adjusted and controlled, the deepest transmission loss of about -70dB. FBGs fabricated were of good stability and repeatability, especially in hydrogen fibers whose stability was independent of high-temperature annealing (1500C) which was different from the fabrication results of excimer laser sources. Then the unconformity between experimental results and theoretical simulation was discussed and the optimization schemes were proposed. The experimental results and analysis provided a better experimental scheme for UV laser fabricating FBGs and the experimental basis for further optimizing the fabrication technology and further analyzing the microscopic mechanism of optical fiber photosensitivity.

KrF Excimer Laser-Fabricated Bragg Grating in Optical Microfiber Made from Pre-Etched Conventional Photosensitive Fiber

Compact Microfiber Bragg Gratings with High-Index Contrast

Modeling and analysis of localized biosensing and index sensing by introducing effective phase shift in microfiber Bragg grating (μFBG)

High Fluence Krf Excimer Laser Fabricated Bragg Grating in A Microfiber

Fabrication of fiber Bragg gratings with precisely adjustable and controllable parameters based on 213nm solid-state laser

Optimized femtosecond laser direct-written fiber Bragg gratings with high reflectivity and low loss

Mid-infrared microfiber Bragg gratings

Refractive Index Sensing Based on Higher-Order Mode Reflection of A Microfiber Bragg Grating

Fiber Bragg gratings fabricated by femtosecond lasers for narrow-linewidth fiber laser

Erbium fiber laser based on intracore femtosecond-written fiber Bragg grating

A Microfiber Bragg Grating Based On A Microstructured Rod

Miniature Fabry-Perot Cavity Based on Fiber Bragg Gratings Fabricated by Fs Laser Micromachining Technique

A Methode of Estimating the Reflectivity and Refractive-Index Modulation of Double-Cladding Large Core Fiber Bragg Grating

UV laser fabrication and modification of fiber Bragg gratings by stitching sub-gratings with in situ fluorescence monitoring

Grating Inscription Into Fluoride Fibers: A Review

Review of Femtosecond-Laser-Inscribed Fiber Bragg Gratings: Fabrication Technologies and Sensing Applications

Femtosecond laser line-by-line inscription of apodized fiber Bragg gratings

Fiber Bragg Grating with Enhanced Cladding Modes Inscribed by Femtosecond Laser and a Phase Mask

Fiber Bragg gratings inscribed in nanobore fibers.

High-Efficiency Inscription of Fiber Bragg Grating Array with High-Energy Nanosecond-Pulsed Laser Talbot Interferometer

Femtosecond laser inscribed fiber Bragg gratings based on precise spatial apodization