Experimental and Numerical Investigation on Non-Premixed CH4/air Combustion in a Micro Swiss-roll Combustor
Shixuan Wang,Zili Yuan,Aiwu Fan
DOI: https://doi.org/10.1016/j.fuel.2023.128740
IF: 4.264
2019-01-01
Chemical Engineering and Processing - Process Intensification
Abstract:In the past decades, combustion in miniature Swiss-roll combustors has widely investigated for applications to micro power generation systems. However, all the existing Swiss-roll combustors are designed for premixed combustion mode, in which the flame is prone to flash back or become extinguished at low flow rates. In the present work, a miniature Swiss-roll combustor was designed specifically for non-premixed combustion, which has two inlets for counterflows of methane and air, and two outlets for exhaust gas. Preliminary experimental investigation was conducted on a model combustor with a transparent quartz cover, which demonstrated that this new configuration brings about several merits. First, the flame structure and outer wall temperature distribution under most conditions are almost symmetric. Second, this combustor can run at a very low equivalence ratio ( < 0.3) and a very small fuel flow rate ((similar to)0.029 L/min). As a result, the wall temperature level is relatively low, which makes this combustor a potential heat source for miniature thermoelectric devices using low-temperature materials such as Bi2Te3. Furthermore, the exhaust gas can be controlled at a very low temperature level ((similar to)390-450 K), which means this micro combustor has a good heat recirculation performance.