Abstract:The effects of Ce addition(310 ppm and 1500 ppm)on the microstructure,texture and properties of ultrahigh-purity copper(99.99999％)were systematically studied using scanning electron microscopy(SEM),transmission electron microscopy(TEM)and electron backscattered diffraction(EBSD)analyses,combined with the microhardness and conductivity tests.Regarding the microstructure of the as-cast and as-extruded samples,the addition of Ce refines the grain size of the ultrahigh-purity copper and the refinement effect of 310Ce alloy is greater than that of 1500Ce alloy.This is due to the stronger component supercooling and the accelerated recrystallization caused by lower Ce content.In addition,Ce can react with Cu to form the Cu-Ce eutectic phases,which are deformable during the hot deformation.Furthermore,the added Ce can weaken the texture,showing a variation of brass recrystallization(BR),rotated cube,copper and S texture components,which depends on the recrystallization,the particle stimulated nucleation(PSN)as well as the stacking fault energy(SFE).Most remarkably,the introduction of Ce enhances the hardness of the ultrahigh-purity copper without obviously reducing its conductivity.The major {111} orientations and the stress distributions are responsible for such a superior conductivity of the Ce-containing alloys.

The Effect of Different Concentrations of Chloride on the Structure of Cuupd on Pt(111)

The Structure of the Underpotential Deposition of Copper on to Pt(111) in the Presence of Chloride Anions: a LEED Structure Analysis

Effects of Anions on the Underpotential Deposition Behavior of Cu on Polycrystalline Pt

Unveiling the effect of chloride on the surface modification of Cu(111)

UPS study of electronic states of CuPc/Ag(110)

Effect of Cerium on Microstructure, Texture and Properties of Ultrahigh-Purity Copper

Electronic structures of CuPc on a Ag(110) surface

The surface chemistry of Cu (100) in HCl solutions as a function of potential: a study by LEED, Auger spectroscopy and depth profiling

An Investigation Of The Ordered Au/Cu(111) Surface - Leed, Araes And Arups Results

The geometry structure and electronic states of chlorine on Cu(111) surface

Underpotential deposition of Cu on Au(111) in sulfate-containing electrolytes: a theoretical and experimental study

Electronic And Structural Properties At The Interface Between Iron-Phthalocyanine And Cu(110)

Effect of CuI Layer on Photoelectrochemistry of Cu2O Films

Structure Investigation of the Fe on Cu(110) Surface

First Principle Study on Adsorption Structure of Chlorine on Cu(111)Surface

The Effect of the Size of Surface Pd Island Ensembles on Electron Transfer of Adsorbed Perchlorate Ions on Au(111).

The Structure of FePc on Cu(100)

Effect of the Convergence of Cu Cap on the Structure of Co/Cu(111) Film

Effect of Ni and Pd on the geometry, electronic properties, and active sites of copper clusters

From a free electron gas to confined states: A mixed island of PTCDA and copper phthalocyanine on Ag(111)