Abstract:The biggest obstacle to the widespread implementation of polymer electrolyte membrane fuel cells (PEMFCs) is their cost, primarily due to the use of platinum catalysts. The high intrinsic catalyst activity exhibited on a rotating disk electrode (RDE) is rarely realized in a membrane electrode assembly (MEA), which is a long-standing challenge for PEMFCs and a cause of low catalyst utilization. To translate the high RDE performance of a catalyst into a MEA, the design of an ideal ionomer/catalyst interface is proposed: a thin, conformal ionomer film covers the maximum surface of a Pt nanoparticle and thus simultaneously maximizes catalyst utilization, ( i.e. , high mass activity and electrochemically active surface area) and O 2 diffusion rate ( i.e. , high current density performance) without compromising proton conduction. Building such an interface is a long-standing challenge due to the lack of interaction between the ionomer and catalyst particles, resulting in large ionomer agglomerates and inhomogeneous ionomer coverage over the catalyst nanoparticle, with consequent poor fuel cell performance. In this work, this ionomer/catalyst interface has been engineered, utilizing the electrostatic attraction between positively charged catalyst and negatively charged ionomer particles in a catalyst ink and preserved in a solid catalyst layer. As a result, this interface leads to previously unachieved proton exchange membrane fuel cell performance in terms of both catalyst utilization (75% vs. 45%) and peak/rated power density ( i.e. , 1.430/0.930 W cm −2 , H 2 /air, cathode Pt loading: 0.1 mg Pt cm −2 ) for pure Pt catalysts, even better than those of Pt alloy catalysts. This work demonstrates the formation of an interface in the liquid phase (using ultra-small-angle X-ray scattering in combination with cryo-TEM, isothermal–titration–calorimetry) and the preservation of the interface in the solid catalyst layer (using TEM) and estimates the effective coverage and thickness of the ionomer film (using limiting current density, RDE and fuel cell performance).

A silicon-based fuel cell micro power system using a microfabrication technique

A Monolithic Integrated Micro Direct Methanol Fuel Cell Based on Sulfo Functionalized Porous Silicon

A high efficient micro-proton exchange membrane fuel cell by integrating micro-nano synergical structures

High Efficient Μ-Pemfcs by Integrating Micro/nano Scaled Performance Improving Components

A Methanol Fuel Processing System with Methanol Steam Reforming and CO Selective Methanation Modules for PEMFC Application

Fabrication of miniature silicon wafer fuel cells with improved performance

Fabrication of miniature silicon wafer fuel cells using micro fabrication technologies

Development of Integrated Thermally Autonomous Reformed Methanol-Proton Exchange Membrane Fuel Cell System

Design and Fabrication of a Polymer-Based Micro Direct Methanol Fuel Cell

Application of Mems Technology to Micro Direct Methanol Fuel Cell

Design, Fabrication and Testing of a Silicon-Based Air-Breathing Micro Direct Methanol Fuel Cell

Miniaturized silicon-based direct methanol fuel cell

A Micro Dmfc Based On Silicon Micromachining Technology

A Micro Direct Methanol Fuel Cell Using PDMS Assembly Technology

Fabrication of Micro Direct Methanol Fuel Cell Based on ME MS Technologies

Ionomer Cross-Linking Immobilization of Catalyst Nanoparticles for High Performance Alkaline Membrane Fuel Cells

Unraveling the core of fuel cell performance: engineering the ionomer/catalyst interface

A Novel Proton Exchange Membrane Based on Sulfo Functionalized Porous Silicon for Monolithic Integrated Micro Direct Methanol Fuel Cells

Enhanced Performance of Non-Pgm Catalysts in Air Operated PEM-fuel Cells

Performance Research of a Silicon-Based Micro Direct Methanol Fuel Cell

Passive Fuel Delivery Based on Hydrophobic Porous Silicon for Micro Direct Methanol Fuel Cells