Abstract:This work aims to improve the combined flow and thermal network (CFTN) accuracy for radially air-cooled generators by investigating the possible error stemming from the flow part. The nonlinear resistance characteristics of the T-junction dividing flow are first time considered for such cooling arrangement, which is achieved by employing the Gardel equations and the blend equation as the governing equations. Compared with the CFD model results as the benchmark, the nonlinear CFTN predicts an accurate flow rate in the radially extended airducts, making only 9% root mean square (rms) error for all the airducts. On the contrary, the linear CFTN fails to obtain a reliable flow distribution, as the rms error is as large as 34%. As a result, the nonlinear CFTN improves the accuracy of the maximum winding temperature by 6.4% over the linear CFTN and gives a more reasonable temperature gradient in the axial direction. Furthermore, the relative difference between the linear and nonlinear CFTNs is found to be even larger in the following conditions: large cooling air flow rate, wide airgap, low slot fill factor, and large airduct number. The proposed nonlinear CFTN modeling approach is also validated against experimental measurements for a prototype. The modeled temperatures match well with the measurements at different axial positions. According to the aforementioned findings, the nonlinear CFTN modeling approach is considered to be a reliable thermal analysis tool for the radial air-cooling arrangement.

Thermal Analysis of AC Contactor Using Thermal Network Finite Difference Analysis Method.

Thermal Simulation of AC Contactor

Thermal-Fluid Co-Simulation and Modelling of IGBT with Thermal Resistance Network

Thermo-mechanical Coupling Analysis of a High-Speed Actuating Mechanism Based on a New Thermal Contact Resistance Model

Finite Element Analysis of Spindle Thermal Character Based on Thermal Contact Resistance

A Thermal Network Model for Multichip Power Modules Enabling to Characterize the Thermal Coupling Effects

Thermal-aware electrical analysis of high-speed interconnect

Improved thermal hydraulic network modelling and error analysis in disc‐type transformer windings

A Temperature Field Model of Complicated Thermal Analysis System Based on Thermal Network Method

Improving Combined Flow and Thermal Network Accuracy for Radially Air-Cooled Generators by Considering the Nonlinear Resistance Characteristics of T-Junction Flow

Thermal Safety Assessment Method for Power Devices in Natural Air-Cooled Converters

Adaptive finite-time fan-coil outlet wind temperature control for the ASHPAC system

Thermal Analysis on NAC-STC Spent Fuel Transport Cask under Different Transport Conditions

Thermal Analysis Strategy for Axial Permanent Magnet Coupling Combining FEM with Lumped-Parameter Thermal Network

Analysis of Hot Spot Temperature of Dry-Type Transformer Based on Finite Element Method

An Accurate and Efficient Implicit Thermal Network Method for the Steady-State Temperature Field

Thermal analysis and test methods for local environment temperature control in-vehicle apparatus

Thermal Analysis of Permanent Magnet Synchronous Motor under Different Working Conditions Based on Thermal Network

Comparing Between 3D Finite-element Method and Thermal-circuit Method of Calculating Thermal-resistances in the Thermal Field of Three-gorge Hydrognerator

Test and Analysis on Extended Temperature Rise of 110 kV Transformer Based on Distributed Temperature Sensing

Analysis methodology during heat transfer in fluid domain: Conduction-advection thermal resistance in parallel