Abstract:Aiming at enhancing the electrochemical characteristic of RE-Mg-based composite, the partial substituting La with Ce experiment in the composites was conducted, and the surface modification treatment of the alloys was performed by mechanical coating Ni. By means of mechanical trituration, The La 10-x Ce x Mg 80 Ni 5 (x = 0–2) + y wt% Ni (y = 50–200) compound materials which have the structures of nanocrystalline and amorphous were synthesized. In order to make sense of the principle action of Ce and Ni elements in structural and electrochemical properties of the material, some deep research were carried out. According to the final results, the as-milled composites have the electrochemical hydrogen absorption and hydrogen desorption abilities at room temperature. Having no use for activation, the as-milled composites can reach the maximum discharge capacities when the first cycling was carried out. With the Ni value x changed from 50 to 200, the discharge capacity was varied from 70.5 mAh/g to 902.1 mAh/g; moreover, the capacity retention rate at 20th cycle (S 20 ) and high rate dischargeability (HRD) of the (x = 0) composite were heightened from 67.2 % to 82.3 %, from 50.6 % to 55.7 % respectively. The composites' (y = 100) discharge capacity has a maximum value 118.5 mAh/g when the Ce value x is 1. The capacity retention rate (S 20 ) is enhanced from 53.3 % to 68.5 % by lifting Ce content from x = 0 to x = 2. what's more, the high-rate discharge ability (HRD), the electrochemical impedance spectrum (EIS), potentiodynamic polarization curves, and potential-step measurements all intimate that substituting La with Ce clearly promotes the composites' electrochemical kinetic properties, but maximum values emerge only when the x value is 1.

Direct Electrolytic Preparation of La0.5Ce0.5Ni5 Alloy in Molten Salt

Electrodeposition of Nb-Sn Alloy from Sncl2-Nbcl5-Emic Ambient Temperature Molten Salts

Surface Modification and Preparation Technique for La_(1- X) Ce_x (nicomnal)_5 Hydrogen Storage Alloy Electrode

Crystal structure and microstructure of rapidly solidified La(Ni, Sn)(5+x)(x=0.1-0.4) hydrogen storage alloys

A Cerium Oxide Film Prepared From Molten Nitrates

Influence of the Substitution Ce for La on Structural and Electrochemical Characteristics of La0.75-xCexMg0.25Ni3Co0.5 (x=0, 0.05, 0.1, 0.15, 0.2 At. %) Hydrogen Storage Alloys

Cerium oxide film prepared from molten salts

Synthesis of LiNiO2 cathode materials with homogeneous Al doping at the atomic level

Influence of Rapid Quenching on the Microstructure and Electrochemical Properties of Co-free LaNi4.92Sn0.33LaNi4.92Sn0.33 Hydrogen Storage Electrode Alloy

Microstructures and Electrochemical Hydrogen Storage Performances of La0.75Ce0.25Ni3.80Mn0.90Cu0.30(V0.81Fe0.19)x (x = 0–0.20) Alloys

Formation of LaNi5 Hydrogen Storage Alloy by Electrodeposition of La Using Molten Salt

Effect of Rapid Quenching on the Microstructure and Electrochemical Characteristics of La 0.6 Ce 0.4 Ni 3.6 Co 0.65 Mn 0.4 Al 0.2 Ti 0.05 (feb) 0.1 Hydrogen Storage Alloy

Electrical Properties of Ce0.8Sm0.1Nd0.1O2-delta/La10Si6O27 Composite Electrolytes

Intermediate Temperature Electrochemical Properties of Lutetium-Doped SrCeO3/SrZrO3-molten Carbonate Composite Electrolyte

Direct Electro-deoxidation of Ilmenite Concentrate to Prepare FeTi Alloy in CaCl2 Molten Salt

Effect of Ce replacing La on the electrochemical performance of amorphous grain boundaries Mg-Ni-based materials

Robust Strategy for Crafting Li5cr7ti6o25@Ceo2 Composites As High-Performance Anode Material for Lithium-Ion Battery

Morphology and Electrochemical Performance of Li[Li0.2mn0.54ni0.13co0.13]O-2 Cathode Materials Treated in Molten Salts

Electrochemical Co-Reduction Extraction of Neodymium in LiCl-KCl-ZnCl2 Molten Salt System

Atomic Layer Deposition of Al2O3 on LiNi0.68Co0.10Mn0.22O2 for Enhanced Electrochemical Performance

Electrochemical Properties of the Ternary Alloy Li5alsi2 Synthesized by Reacting Lih, Al and Si As an Anodic Material for Lithium-Ion Batteries