Abstract:To realize the utilization of high-performance lithium–oxygen batteries (LOBs), a rational-designed cathode structure and efficient catalytic materials are necessary. However, side products accumulated during battery cycling seriously affects the performance. Designing a cathode catalyst that could simultaneously facilitate the catalytic efficiency of the main reaction and inhibit the side reactions will make great sense. Herein, NiCeOx was proposed for the first time as a bifunctional cathode catalyst material for LOBs. The combined action of NiO and CeO2 components was expected to facilitate the decomposition of byproducts (e.g., Li2CO3), increase the oxygen vacancy content in CeO2, and enhance the adsorption of oxygen and superoxide. NiCeOx nanorods (NiCeOx PNR) were prepared using electrospinning method. It showed a hollow and porous nanorod (PNR)-like structure, which provided a large number of catalytic active sites and facilitated the transport of reactants and the deposition of discharge products. As a result, a high specific discharge capacity (2175.9 mAh g–1) and a long lifespan (67 cycles at 100 mA g–1 with a limited capacity of 500 mAh g–1) were obtained.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.2c00545.Synthesis of NiO and CeO2, SEM and TEM images of NiCeOx PNRs, XPS patterns of the NiCeOx PNR (Ni/Ce = 24/1), LSVs of the ORR for different catalysts in 0.1 M KOH electrolyte: (a) Ni/Ce = 5/1 catalyst, (b) Ni/Ce = 9/1 catalyst, (c) Ni/Ce = 5/1 catalyst, and (d) Ni/Ce = 24/1 catalyst, discharge–charge curves for the selected cycles of NiO, CeO2 Super P, Ni/Ce = 5/1, and Ni/Ce = 9/1 catalysts with a capacity limitation of 500 mAh g–1 at a current of 100 mA g–1 (PDF)This article has not yet been cited by other publications.

Cerium oxide film prepared from molten salts

A Cerium Oxide Film Prepared From Molten Nitrates

Deposition Of Ceo2 On Tio2 Nanorods Electrode By Dielectric Barrier Discharge Plasma To Enhance The Photoelectrochemical Performance In High Chloride Salt System

Nucleation and Growth of Anodic Electrodeposited Cerium Oxide Thin Film

Corrosion resistance of anodically oxidized LY12 aluminum alloy after modification with cerium nitrate and silane

Spherical CeO 2 synthesized by molten-salt with unique fast variable valence properties for lithium-ion battery anode

Cerium doped amorphous Ni(OH)x on Cu(OH)2 nanorods for enhanced oxygen evolution reaction

Morphology and Electrochemical Performance of Li[Li0.2mn0.54ni0.13co0.13]O-2 Cathode Materials Treated in Molten Salts

Oxygen evolution at nickel hydroxide films Co-deposited light rare earth elements

On the Formation of a Cathode Electrolyte Interphase on High Voltage Li-ion Cathodes

AMORPHIZATION OF CERIUM MONONITRIDE DURING OXIDIZATION CHARACTERIZED BY OPTICAL MICROSCOPY, SCANNING ELECTRON MICROSCOPY, X-RAY DIFFRACTION AND X-RAY PHOTOELECTRON SPECTROSCOPY

Cerium Nanophases from Cerium Ammonium Nitrate

Electroless nanoceria films on nickel-based superalloy

Ceo2 Thin Film As A Lithium-Ion-Storage Material Fabricated by Pulsed Laser Deposition

Formation/Decomposition of Li 2 O 2 Induced by Porous NiCeO x Nanorod Catalysts in Aprotic Lithium–Oxygen Batteries

Nickel-doped lanthanum cerate nanomaterials as highly active electrocatalysts

Cerium Oxides As Oxygen Reduction Catalysts For Lithium-Air Batteries

CeO2-C nanorods obtained by high-temperature carbonization of Ce-MOF as separator coating for Li-S battery

Preparation of CeO2-coated Li1.2Mn0.54Co0.13Ni0.13O2 as cathode materials for Lithium Ion Batteries

Alleviation of O2 competition with NO in electrochemical reduction through nanoceria supported on LSM cathode

A Molten-Salt Method to Synthesize Ultrahigh-Nickel Single-Crystalline LiNi0.92 Co0.06 Mn0.02 O2 with Superior Electrochemical Performance as Cathode Material for Lithium-Ion Batteries.