Abstract:The catalytic membrane reactor, a kind of process intensification technology, can enhance chemical engineering efficiencies by combining multi-steps of reaction and separation into one unit. However, the prerequisite to realize such a promising technology is the good match between reaction efficiency, transport rate and membrane stability to withstand the real reacting conditions particularly for these high temperature reactions. In this work, we showcased the development of catalytic La0.8Ca0.2Fe0.94O3-δ-0.05Ag (LCF-Ag) hollow fiber membrane reactor to couple water splitting and partial oxidation of methane (POM) for simultaneous H2 and syngas production. Without addition of extra catalyst, LCF-Ag membrane provides the best H2 production rates (fluxes) from thermal water splitting of 3.6 and 0.69 mL min-1 cm-2 by coupling hydrogen or methane oxidation at 950 °C to consume the permeated oxygen, respectively. Noteworthy that H2 flux, methane conversion and CO selectivity is closely correlated with the presence of catalyst and operating conditions. By integrating the Ni/LaNiO3/γ-Al2O3 catalytic layer in the lumen surface to improve the POM reaction kinetics, the optimized LCF-Ag hollow fibre membrane reactor could give the best H2 flux of 7.9 mL min-1 cm-2, CH4 conversion of 58% and CO selectivity of 89%, respectively. The membrane reactor was stably operated at 950 °C for more than 20 h without failure. These results are compared favorably with literature, encouraging more future exploration to further improve membrane reactor performance for practical applications.

Perovskite Hollow Fibre Membranes in the Partial Oxidation of Methane to Synthesis Gas in a Membrane Reactor

Partial Oxidation of Methane to Syngas in a Perovskite Hollow Fiber Membrane Reactor

Catalytic Membrane Reactors for Partial Oxidation Using Perovskite Hollow Fiber Membranes and for Partial Hydrogenation Using a Catalytic Membrane Contactor

Oxygen Selective Ceramic Hollow Fiber Membranes for Partial Oxidation of Methane

Perowskit‐Hohlfasermembranen Für Die Katalytische Partialoxidation Von Methan Zu Synthesegas

Oxidation/Reforming Methane Oxidation Processes Based on Dense Tubular La0.6Sr0.4Co0.2Fe0.8O3-d Membrane Reactor

Syngas Production in a Novel Perovskite Membrane Reactor with Co-Feed of CO2

Preparation and Application of Perovskite Hollow Fiber Oxygen Permeable Membrane

Improved Water Dissociation and Nitrous Oxide Decomposition by in Situ Oxygen Removal in Perovskite Catalytic Membrane Reactor

Simultaneous Production of Hydrogen and Synthesis Gas by Combining Water Splitting with Partial Oxidation of Methane in A Hollow-Fiber Membrane Reactor

Selective Oxidation of Ch4 and C2h6 over A Mixed Oxygen Ion and Electron Conducting Perovskite-A Tap and Membrane Reactors Study

Hollow Fiber Membrane Reactors for the Oxidative Activation of Ethane

CO2-stable Ce0.9Gd0.1O2−δ-perovskite Dual Phase Oxygen Separation Membranes and the Application in Partial Oxidation of Methane to Syngas

Performance of U-shaped BaCo0.7Fe0.2Ta0.1O3−δ Hollow-Fiber Membranes Reactor with High Oxygen Permeation for Methane Conversion

Partial oxidation of methane in a Zr 0.84Y 0.16O 1.92-La 0.8Sr 0.2Cr 0.5Fe 0.5O 3-δ hollow fiber membrane reactor targeting solid oxide fuel cell applications

Catalytic partial oxidation of methane to syngas: review of perovskite catalysts and membrane reactors

Partial oxidation of methane in hollow‐fiber membrane reactors based on alkaline‐earth metal‐free CO2‐tolerant oxide

Partial Oxidation of Methane to Syngas in Tubular Oxygenper-Meable Reactor

Partial oxidation of ethane to syngas in an oxygen-permeable membrane reactor

Stable oxygen permeable membrane with Ce0.9Gd0.1O2-δ protective layer for syngas production

Coupling water splitting and partial oxidation of methane (POM) in Ag modified La0.8Ca0.2Fe0.94O3-δ hollow fiber membrane reactors for co-production of H2 and syngas