Abstract:The irreversibility of the thermoelectric cooling (TEC) model could analyze and optimize refrigeration performance. In present work, a one-dimensional thermal conductivity model of the internal irreversible thermoelectric element was first established. Subsequently, two categories of evaluation indexes were further analyzed, i.e., cooling capacity Q c and coefficient of performance (COP). The thermodynamic model of TEC was then established jointly with finite time thermodynamics. The influences of current and the ratio of heat transfer areas between cold and hot sides on the steady-state characteristics of TEC were further discussed under Newtonian linear heat transfer. In addition, a transient thermodynamic model of TEC equipment was built to compare the effects of pulse width, pulse gradient, and pulse current on the cold side temperature of the TEC module. Theoretical results demonstrated that the effective working range of the steady-state operating current is 2A ≤ I ≤ 25A, and the area ratio of heat transfer between cold and hot sides is 0.07 ≤ x ≤ 1. The cooling capacity ( Q c ) and coefficient of performance (COP) could reach up to about 50W and 2.0, respectively. In addition, the increase of external heat transfer capacity of the hot side could reduce the transient supercooling temperature and the peak overshoot temperature, simultaneously. Afterward, the cooling capacity was remarkably enhanced. Current research could provide a reliable support for the optimization design and performance improvement of the thermoelectric cooler. Thermal conductivity model of internal irreversible thermoelectric element was established; Effects of cold and hot ends on the TEC were discussed under Newtonian linear heat transfer; Effects of pulse width, gradient and current on TEC cold end temperature were investigated; Heat transfer capacity of TEC hot end could reduce supercooling and overshoot temperatures; The irreversibility of TEC model will enhance its potentials for low grade energy exploitation.

Optimization of irreversible four-heat-source absorption refrigerator with finite heat capacity

Performance Optimization of an Irreversible Carnot Refrigerator with Finite Mass Flow Rate

Optimisation Of An Irreversible Carnot Refrigerator Working Between Two Heat Reservoirs

Thermodynamic optimization analysis of a tube-in-tube helically coiled heat exchanger for Joule-Thomson refrigerators

Equivalent Cycle and Optimization of Auto-Cascade Absorption Refrigeration Systems

THERMODYNAMICS MODEL AND PERFORMANCE OPTIMIZATION OF ABSORPTION HEAT PUMP

Thermodynamic Optimization Characteristics Of A Type I Absorption Heat Pump Within Finite Time

Theoretical Analyses of a New Two-Stage Absorption-Transcritical Hybrid Refrigeration System

Heat Capacities of Four Promising Alternatives to Lithium Bromide Aqueous Solution in Absorption Refrigerators

Off-Design Performance of an Exhaust-Fired Absorption Refrigerator

Experimental Study of a New Ejector-Absorption Refrigeration Cycle Driven by Multi-Heat Sources

Universal optimization efficiency and bounds of Carnot-like heat engines and refrigerators under shortcuts to isothermality

Power and Thermal Efficiency Optimization of an Irreversible Steady-Flow Lenoir Cycle

Analysis of Features of J-T Refrigeration Cycles Using Mixed Refrigerants with an Infinite Low Temperature Heat Reservoir

On reversible, endoreversible, and irreversible heat device cycles versus Carnot cycle: A pedagogical approach to account for losses

Effects of variable-temperature heat reservoirs on performance of irreversible Carnot refrigerator with heat recovery

Optimum allocation of heat transfer surface area for cooling load and COP optimization of a thermoelectric refrigerator

CAPABILITY ANALYSIS OF REFRIGERATION SYSTEM WITH NON-EQUILIBRIUM ADSORPTION

General thermodynamic performance of irreversible absorption heat pump

Intermediate pressure optimum mathematical calculation model in the two-stage LiBr/H2O absorption refrigeration cycle.

Irreversibility of thermoelectric cooling model: Newtonian linear heat transfer and finite time thermodynamics