Abstract:A simulation model using the first thermodynamic law is first proposed to estimate the performance of diffusion absorption heat transformer, which could potentially improve energy utilization efficiency and reduce CO2 emission. Thermodynamic analyses are performed to investigate the cycle performance when H2O is employed as refrigerant, LiBr as absorbent for H2O, R134a as diffusion gas and TEGDME as absorbent for R134a. Analyses aim to optimize system COP under specified temperature of two generators, two absorbers, evaporator and condenser, and compare the influence of the six temperatures on COP. The results under design conditions show that larger generation efficiency of R134a and smaller mass fraction of LiBr in H2O–LiBr solution are beneficial to COP improvement, but they are limited by the operating conditions. There is an optimal ratio of H2O–LiBr solution mass flow rate to R134a mass flow rate for an optimal COP, and the optimal ratio decreases with the increase of LiBr mass fraction in H2O–LiBr solution. The highest COP of 0.1701 is reached with the optimal ratio of 1.743. In addition, under design-off conditions, the temperatures of refrigerant generator and evaporator have the greatest influence on COP while the temperature of diffusion gas generator has the least influence. The diffusion absorption heat transformer will provide a new way to lift temperature of low grade heat without electricity input which can further improve the energy utilization efficiency and reduce the CO2 emission.

Intermediate pressure optimum mathematical calculation model in the two-stage LiBr/H2O absorption refrigeration cycle.

Theoretical Analyses of a New Two-Stage Absorption-Transcritical Hybrid Refrigeration System

Analysis of a Hybrid System of Adiabatic Absorption two-stage Liquid Desiccant and CO2 Transcritical Cycles

Vapor–liquid Equilibria of HFC‐161 + HFC‐32 + DMF Ternary Mixture for Low‐grade Heat Driven Absorption Refrigeration System

Analysis of Features of J-T Refrigeration Cycles Using Mixed Refrigerants with an Infinite Low Temperature Heat Reservoir

The prediction for optimum combination of high pressure and intermediate pressure on a small refrigerated cabinet with CO2 transcritical two-stage cycle

Theoretical Investigations on the Cycle Performance of a Single-Pressure Diffusion Absorption Heat Transformer with LiBr–H2O-R134a-TEGDME

Effect of Inter-Stage Pressure on Performances of Two-Stage Transcritical CO2 Refrigeration Cycle with Dedicated Absorption Dual-Subcooling and Mechanical Recooling

Performance of a Single-Stage Linde-Hampson Refrigerator Operating with Binary Refrigerants at the Temperature Level of −60 °C

Thermodynamic Performance Prediction Of Pulse Tube Refrigeration With Mixture Fluids

Theoretical Study of Dual-Heat Mode Operation of Double-Effect Parallel-Flow LiBr-H_2O Absorption Refrigeration System

Experimental Study of a New Ejector-Absorption Refrigeration Cycle Driven by Multi-Heat Sources

Finite-time Thermodynamic Optimization of an Irreversible Four-Heat-source Absorption Refrigerator

A mathematical model with experiments of single effect absorption heat pump using LiBr–H2O

Theoretical study on adsorption refrigeration/heat pump cycles

Preliminary Conceptual Design and Thermodynamic Comparative Study on Vapor Absorption Refrigeration Cycles Integrated with a Supercritical CO2 Power Cycle

Thermodynamic Analysis on CO2 Transcritical Two-Stage Compression Refrigerating Cycle

Thermodynamic Optimization Principle for Open Inverse Brayton Cycle (refrigeration/heat Pump Cycle)

NLP model-based optimal design of LiBr–H2O absorption refrigeration systems

Compositions optimization method based on the effective refrigeration effect for Mixed-refrigerant Joule-Thomson refrigerators cooling distributed-temperature heat loads

Thermodynamic evaluation of two-stage refrigeration cycle with deep intercooling and series-parallel integration of thermal and mechanical compression