Abstract:In order to realize fiber-optic temperature sense based on macrobending loss properties of sinlgle-mode fiber, temperature sensing properties of macro-bend single-mode fiber were studied theoretically and experimentally. Temperature correction is made for a classical macrobending loss theoretical formula of single-mode fiber. Then simulation analysis of effects of bend radius, wavelength and temperature on bend loss of a single-mode fiber with core-infinite cladding structure is made based on the formula. After that, a single-mode fiber temperature sensor with an inner absorption layer and an outer nickel layer outside the cladding layer of the fiber is designed and made. Finally, experimental tests of temperature sensing performance of the sensor are carried out and discussed. Results show that macrobending loss of the fiber with core-infinite cladding structure is sensitive to bend radius, wavelength of light resource and temperature, and the temperature response of the sensor is linear. In addition, the proposed fiber-optic sensor shows a temperature resolution of 0.4 degrees C. It' s worth noting that the temperature sensitivity and resolution can be increased by decreasing the bend radius and raising the wavelength of light resource. Thus such single-mode fiber can be treated as core-infinite cladding structure single-mode fiber, which can be used to develop macro-bend optical fiber sensor based on macrobending loss properties.

The Research Advances of Macrobending Fiber Based Sensors

Microfiber Optical Sensors: A Review

Microbending Optical Fiber Sensors and Their Applications

Tapered Optical Fiber Sensing Technology

Theoretical and Experimental Study of Macrobending Loss of the Single-Mode Fiber

Single-Mode-Multimode-Single-Mode Fibre Structure for Sensing Applications: A Review

Design, sensing principle and testing of a novel fiber optic displacement sensor based on linear macro-bending loss

Macrobending loss in wrapped fiber optic for load detections

Temperature Response Properties of Macrobending Loss of Single-mode Fiber

Implementation optical fiber sensor using macro bending method for flood sensor

Macro-Bending Loss of Single-Mode Fiber Beyond Its Operating Wavelength

Improved evaluation model for macro-bending loss and power variation in single-mode fiber

Macrobending loss in fiber optic wrapped on rubber-spring wire structure under static load-pressure

A simple macro-bending loss optical fiber crack sensor for the use over a large displacement range

A U-shaped-wound fiber macro-bending loss crack sensor improved by an optical splitter

The sensing principle of a new type of crack sensor based on linear macro-bending loss of an optical fiber and its experimental investigation

Water sensor using macrobending-sensitive fiber for real-time submersion monitoring

Simultaneous displacement, temperature and strain sensing system based on fiber macro-bend loss and edge filter

Macrobending Loss Measurements of G.657 Fiber with Suppression of Ripple Effect Induced by Whispering Gallery Modes

Experimental Investigation of Bending Sensor Based on Helical Structure in Hollow Core Fiber