Adjustable Optical Fiber Displacement-Curvature Sensor Based on Macro-Bending Losses with A Coding of Optical Signal Intensity
Shahad Sabhan Al-Lami,Hussein.K. Atea,Ansam M. Salman,Abdulhadi Al-Janabi,Hussein. K. Atea,Abdul Hadi Al-Janabi
DOI: https://doi.org/10.1016/j.sna.2024.115403
IF: 4.291
2024-04-22
Sensors and Actuators A Physical
Abstract:In this work, a simple design and cost-effective displacement-curvature sensor based on macro-bend single-mode fiber (SMF) is planned and demonstrated. The optical fiber sensor encompasses a bending configuration and the macro-bending losses were exploited as the sensing process for the capturing of angular displacement motion in an angle span between 00 and 900 (that corresponds to curvature displacement between 0 and 49.5 cm). A straight SMF shape and other four bent sensor structures (U-like, drop-like, Knot-like, and eight-like) have been fabricated from sections of 90 cm length SMF. These five sensor configurations will provide high maneuvering for versatile applications. In these adjustable sensing schemes, the fiber sensors were described by monitoring the power loss corresponding to the diverse angular displacement at various bending structures in terms of the shape of the bend, the bending diameter, and the number of wrapping turns. Then, these measurement schemes based on the macro-bending losses were employed to detect the human motion elbow joint, and a proper sensing scheme was adopted to examine the flexion/extension joint motion in detail. The proposed sensors showed enhanced sensitivity to flexion/extension joint motion range between -0.25 and -0.477 dB/o and good sensitivity to curvature ranging between -0.552 and -1.052 dB/cm. The demonstrated and planned sensing techniques are adjustable and accessible for different types of human and mechanical movements.
engineering, electrical & electronic,instruments & instrumentation