Abstract:This paper presents a thin-core high-numerical aperture (TC-HNA) optical fiber with low macrobending loss for Rayleigh backscattering-based (RBS-based) temperature and strain measurements. The standard single-mode optical fiber (SMF), commonly used in RBS-based sensing, has low macrobending loss-resistance, making the fiber less suited for sensing applications that require sharp bending of the fiber under test. The TC-HNA fiber, on the other hand, offers high macrobending loss-resistance. Experiments were designed and conducted to demonstrate the reliability of a TC-HNA fiber for RBS-based temperature and strain measurements. The macrobending losses in a standard SMF and a TC-HNA fiber were compared in many experiments conducted with different bending radii ranging from 12.5 mm down to 0.9 mm. The RBS signal for a standard SMF, with a single turn of a 5 mm bending radius, degraded severely, exhibiting a 75% drop (6 dB) in signal power. Notably, the RBS signal for a similar test configuration of a TC-HNA fiber did not exhibit any observable loss. We demonstrated that a TC-HNA fiber could be used for RBS-based measurements with a single turn of ~1 mm bending radius. Moreover, an experiment was conducted to demonstrate the spatial thermal mapping capability of the TC-HNA fiber configured with multiple tight bends with radii in the range ~2-3 mm. The high macrobending loss-resistance of the TC-HNA fiber could extend the range of applications for RBS-based measurements to compact structures, such as batteries, robotic fingers, and printed circuit boards, where sharp bending of the test optical fiber is unavoidable.

Macrobending loss in wrapped fiber optic for load detections

Macrobending loss in fiber optic wrapped on rubber-spring wire structure under static load-pressure

Dynamic Characterization of Macrobending Loss Optical Fiber-Based Load Sensor

Coiling an Optical Fiber for Long-Range Dynamic Displacement and Force Sensing

The Research Advances of Macrobending Fiber Based Sensors

Implementation optical fiber sensor using macro bending method for flood sensor

Multiplexing Optical Fiber Macro-Bend Load Sensors

Macro-Bending Loss of Single-Mode Fiber Beyond Its Operating Wavelength

Design of a Flexible Weight Sensor Using Optical Fibre Macrobending

Design and Operation of Optical Fiber for Mass Measuring Instrument with Bending Power Loss Principle

A simple macro-bending loss optical fiber crack sensor for the use over a large displacement range

Design, sensing principle and testing of a novel fiber optic displacement sensor based on linear macro-bending loss

Curvature Analysis in Fiber Optic Cables as a Tilt Sensor Based on Macro Bending

Macrobending Loss Measurements of G.657 Fiber with Suppression of Ripple Effect Induced by Whispering Gallery Modes

Theoretical and Experimental Study of Macrobending Loss of the Single-Mode Fiber

Microbending Optical Fiber Sensors and Their Applications

Distributed Fiber-Optic Sensing With Low Bending Loss Based on Thin-Core Fiber

Two-dimensional displacement optical fiber sensor based on macro-bending effect

Bending-Loss-Resistant Brillouin Optical Time-Domain Analysis Based on Thin-Diameter Fiber