Abstract:Method of soft metal (Cu) strengthening of Ti3SiC2 was conducted to increase the hardness and improve the wear resistance of Ti3SiC2. Ti3SiC2/Cu composites containing 15 vol.% Cu were fabricated by Spark Plasma Sintering (SPS) in a vacuum. The effect of the sintering temperature on the phase composition, microstructure and mechanical properties of the composites was investigated in detail. The as-synthesized composites were thoroughly characterized by scanning electron micrography (SEM), optical micrography (OM) and X-ray diffractometry (XRD), respectively. The results indicated that the constituent of the Ti3SiC2/Cu composites sintered at different temperatures included Ti3SiC2, Cu3Si and TiC. The formation of Cu3Si and TiC originated from the reaction between Ti3SiC2 and Cu, which was induced by the presence of Cu and the de-intercalation of Si atoms Ti3SiC2. OM analysis showed that with the increase in the sintering temperature, the reaction between Ti3SiC2 and Cu was severe, leading to the Ti3SiC2 getting smaller and smaller. SEM measurements illustrated that the uniformity of the microstructure distribution of the composites was restricted by the agglomeration of Cu, controlling the mechanical behaviors of the composites. At 1000 °C, the distribution of Cu in the composites was relatively even; thus, the composites exhibited the highest density, relatively high hardness and compressive strength. The relationships of the temperature, the current and the axial dimension with the time during the sintering process were further discussed. Additionally, a schematic illustration was proposed to explain the related sintering characteristic of the composites sintered by SPS. The as-synthesized Ti3SiC2/Cu composites were expected to improve the wear resistance of polycrystalline Ti3SiC2.

Mechanical properties of Cu/SiCp composites fabricated by composite electroforming

Study on composite electroforming of Cu/SiCp composites

Microstructure and performance of electroformed Cu/nano-SiC composite

Microstructure and Wear Resistance of Cu/nano-SiC Composite

Thermal Expansion and Mechanical Properties of High Reinforcement Content Sicp/Cu Composites Fabricated by Squeeze Casting Technology

Effects of SiC Content on Wear Resistance of Al-Zn-Mg-Cu Matrix Composites Fabricated Via Laser Powder Bed Fusion

Microstructure, mechanical and tribological properties of Cu-Sn/Cr3C2/Gr composites

Fabrication and Properties of SiC/Cu Composites for Electronic Packaging

Enhancing mechanical properties of copper matrix composite by adding SiO2 quantum dots reinforcement

Microstructure and Mechanical Properties of Composites Obtained by Spark Plasma Sintering of Ti3SiC2-15 vol.%Cu Mixtures

Optimisation of Properties of Ti3SiC2 Reinforced Copper Matrix Composites

Effect of the amount of SiC particles on the microstructure, mechanical and wear properties of FeMnCoCr high entropy alloy composites

Microstructure and mechanical behavior of carbon fiber reinforced carbon, silicon carbide, and copper alloy hybrid composite fabricated by Cu-Si alloy melt infiltration

Enhanced Mechanical Behavior and Fabrication of Silicon Carbide Particles Covered by In-Situ Carbon Nanotube Reinforced 6061 Aluminum Matrix Composites

Influence Of Cu2o On Interface Behavior Of Copper/Sicp Composite Prepared By Spark Plasma Sintering

Electrical Behavior of SiCp Reinforced Copper Matrix Composites by Hot Pressing

Mechanical and tribological properties of WC particles reinforced Cu-20Zn matrix composites

Microstructure and thermal properties of SiCp/Cu composites with Mo coating on SiC particles

Fabrication and performance of SiC-reinforced Cu: Role of the aspect ratio of the SiC reinforcement phase

Effects of SiCp Parameters on Microstructures, Interface Structure and Mechanical Property of Mg Bulk Composites Produced by Ultrasonic Vibration Processing

Sialon Tailoring Copper-Based Composite to Achieve High Strength, High Strain Integrated with Excellent Wear Resistance