Experimental study on pretreatment of tannery wastewater by air stripping

Jiang Wei,Wang Xiaojia,Jia Renyong,Xia Siqing

2010-01-01

Abstract:Air stripping was used to pre-treat combined tannery wastewater.In order to get the highest removal efficiency of ammonia nitrogen,the influence of the pH value of wastewater,the ratios of air to liquid,the temperature and the initial concentration of ammonia nitrogen were investigated respectively.And the conditions for the removal of Cr,SS,COD and sulfide were also optimized.The result showed that all the main contaminants could be removed effectively when the pH value was 11,and the ratio of air to liquid was above 1 800 at 25～35 ℃.Under the recommended conditions,78.1%～83.5% of NH3-N,96.4% of chromium,88.2% of SS,45.6% of COD,85.0% of sulfide were removed respectively as the concentration of contaminants in the influent wastewater was ρ(NH3-N)=304.7 mg/L,ρ(Cr)=65.0 mg/L,ρ(SS)=1 700 mg/L,ρ(COD)=2 700 mg/L,ρ(S2-)=112.3 mg/L.And that,in a wide range of initial concentrations,NH3-N could also be eliminated effectively. So it is feasible to use air stripping as the pretreatment process for tannery wastewater.