Abstract:Based on the three-dimensional (3D) steady-state CFD numerical simulations conducted previously on an industrial Kalugin top combustion hot blast stove, a two-dimensional (2D) transient CFD numerical model for a single channel (hole) of a column of checker bricks in the regenerator of the same hot stove was established in the present work. The average mass flowrate and temperature of the flue gas flowing into the checker brick holes during the combustion period predicted by the 3D model were used as the inlet boundary conditions of the 2D model. Inside the hole of the checker bricks, processes of fluid flow and heat transfer of the flue gas during the combustion period and those of cold air during the hot-air-supply period were simulated using the 2D model for multiple operation cycles (combustion and hot-air-supply periods) of the hot stove, enabling rapid predictions of hot-air temperature under different operating conditions. The simulation results show that when the fuel gas flowrate and air consumption coefficient during the combustion period are controlled within the range of 80,000–100,000 Nm3/h and 1.02–1.28, respectively, a hot-air temperature in the range from 1273 °C to 1295 °C can be obtained during the hot-air-supply period. Applying this optimized operating condition to the industrial hot stove investigated in this study can achieve significant effects of reducing fuel gas flowrate by 8.6% and increasing hot-air temperature by 32 °C. In addition, a regression analysis on the numerical simulation results and the data measured from the industrial hot stove yields a roughly linear relationship between the dome temperature during the combustion period and the hot-air temperature during the hot-air-supply period, that is, the hot-air temperature would be increased by about 16 °C for every increment of 10 °C in the dome temperature, for instance. Therefore, the influences of the operating parameters on heat transfer characteristics in the regenerator and on hot-air temperature obtained in the present work provide a useful reference for guiding the hot stove operation optimization to achieve significant energy saving and emission reduction through facilitating more efficient combustion to minimize fuel gas consumption in steel plants.

Numerical Simulation of Effect of Preheated Temperature on Hot Blast Stove Combustion Characteristics

Numerical Simulation Study on the Thermal Efficiency of Hot Blast Stoves

Simulation of temperature field of sintering ignition furnace

Numerical Simulation On Structure Optimization For Hot-Blast Stove Burner

Simulation Study on Thermal Process of Hot Blast Stove Group

Numerical Simulation of High Temperature Combustion for Low Heat Value Gas

Numerical Simulation on Combustion Characteristics of Biofuels with Different Calorific Values

Simulation Modelin Aided Design of Hot Blast Stove

Numerical simulation of preheating fuel gas combustion in micro-scale tube

Numerical Simulation of Flow and Heat Transfer Process in Hot Blast Stoves Regenerator

Numerical Simulation of Temperature Field in Blast Furnace Gas Regenerative Furnace

Numerical Simulation of Influence of High Temperature Air on Flow in Combustion Backfolw Section

Numerical Simulation for Cold Blast Distribution Feature of Grid-type Burner of Hot Air Furnace

Numerical simulation on low NOx combustion of pulverized coal by low temperature pre-combustion

Rapid Prediction of Hot-Air Temperature of Kalugin Top Combustion Hot Blast Stove by Means of Computational Fluid Dynamics Numerical Simulation

Numerical Simulation Research of Low Calorific Value Gas Combustion Process

Numerical simulation of combustion distribution in a gas burner

3D thermodynamics and parameters analysis of the external combustion hot blast stove

Numerical Analyses of Effect of Air Distribution on Combustion Characteristics of Tangentially Pulverized Coal-Fired Boiler

Unsteady Numerical Simulation of the Hot Trial Furnace Using the High Temperature Air Combustion Technology

Numerical simulation of NOx emission during high temperature air combustion for burning low heat value gas