Abstract:This study investigates the structure–property relationship in a dissimilar joint between super duplex stainless steel (sDSS 2507) and pipeline steel (X-70) using gas tungsten arc welding and ER2594 filler. Tubing and risers used to transport hydrocarbons are regularly joined using these dissimilar metals. The microstructures of lower heat input (LHI-0.7 kJ/mm) and higher heat input (HHI-1.4 kJ/mm) weldments were examined to understand the influence of heat input on the structure–property relationship. The weldments' mechanical characteristics were tested via hardness, impact, and tensile tests. Base metal and weld zone/interface characterization were studied utilizing optical and scanning electron microscopes with energy-dispersive spectroscopy (EDS). Elemental variation was confirmed by EDS spectra, elemental line mapping, and electron probe microanalysis with wavelength-dispersive spectrometer along the weld interface and weld zone. Significant microstructure variation was observed in X-70 BM at the LHI and HHI weld interfaces. Type II boundary and macro-segregation forms like peninsulas and islands were present in both weldments. In LHI and HHI weldment, duplex microstructure dominates the weld zone cap and filler pass. In the backing pass, duplex microstructure replaces skeletal ferrite, which predominates in the root pass of the HHI weld zone. LHI weldment has an average microhardness of 275 ± 7 HV 0.5 , while HHI had 285 ± 5 HV 0.5 . Both weldment's tensile tests revealed that the sample fractured on the weaker X70 BM side. LHI and HHI weldments had 600 MPa and 610 MPa ultimate tensile strengths and 22% and 18% elongation percentages, respectively. LHI weldments (200 ± 7 J, 210 ± 4 J) and HHI weldments (210 ± 5 J, 220 ± 8 J) have lower average impact toughness in cap and root pass than the sDSS 2507 BM (320 ± 3 J) and X-70 BM (300 ± 6 J), respectively. The increase in heat input led to a minimal 2% difference in tensile strength, a notable 10% increase in hardness, and a slight 5% variation in impact toughness between LHI and HHI weldments. Marine and offshore applications may benefit from investigating the sDSS 2507/X-70 DWJ's process parameter selection, thermodynamic analysis, and structure–property relationship.

Establishment of regression equation between impact ductility and girth joint welding parameter of X70 pipeline steel

Establishment Regression Equation Between Welding Parameter and CTOD of X70 Pipeline Tube

Neural Network Between Impact Ductility of Girth Joint of X70 Pipeline Steel and Welding Parameter

Study on TRIP Effect of X65 Pipeline Steel

Simulation and prediction for welding deformation on welding procedure of hand pallet truck

3D finite element analysis and optimization of welding residual stress in the girth joints of X80 steel pipeline

Effect of root welding heat input on microstructure evolution and fracture mechanism in intercritically reheat-coarse grained heat-affected zone of X80 pipeline steel

Investigation of the tensile strain response of the girth weld of high-strength steel pipeline

Numerical study on the strain capacity of girth-welded X80 grade pipes

Effect of Microstructure on Mechanical Properties of X65MS Welded Pipe Joint

On the evolution of root weld microstructure and properties during automatic girth welding of high strength pipeline steel

Effect of Butt Gap on Stress Distribution and Carrying Capacity of X80 Pipeline Girth Weld

Effect of different welding parameters on residual stress and deformation of 20/0Cr18Ni9 dissimilar metal arc-welding joint

Welding residual stress analysis of the X80 pipeline: simulation and validation

Quantitative Correlation between Thermal Cycling and the Microstructures of X100 Pipeline Steel Laser-Welded Joints

Fracture driving forces of cracked girth welds with mechanical heterogeneity for X80 pipes

Quantitative research on stress failure risk assessment for girth welds with unequal wall thickness of the X80 pipeline under lateral load

Impact of Welding Parameters in the Porosity of a Dissimilar Welded Lap Joint of CP800-XPF1000 Steel Weldment by GMAW-P

Cracking Reasons of X70 Steel Submerged Arc Weld Pipe during Guide-Bend Test

Effects of in-service strain on girth weld failure of an X80 pipeline

Structure–property relationship assessment of dissimilar gas tungsten arc welded joint of pipeline steel and super duplex stainless steel for marine applications