Abstract:The contact finger electrical connection structure is a crucial component of high voltage bushings, and its safety and reliability directly impact the operational stability of the bushing. The electrical contact performance of the contact finger under eccentric conditions was investigated by means of multi‐physics coupling calculation and test. These research findings can serve as a reference for enhancing the operational reliability of the bushing electrical connection structure. The contact finger electrical connection structure is a crucial component of high voltage bushings, and its safety and reliability directly impact the operational stability of the bushing. To investigate electrical contact performance of the contact finger under eccentric conditions, a three‐dimensional electrical, thermal, and force multi‐physics coupling calculation model was established. Additionally, a test platform was constructed to measure electrical contact characteristics of the contact finger. The contact characteristics of the contact finger when the male head was axially deflected and radially offset compared to the female head were obtained. The research findings indicate when the male head deflects axially, the contact force changes of the contact finger blades on both sides are opposite. Moreover, as the axial deflection angle of the male head increases, the resistance of the electrical connection structure shows a rising‐slow decreasing‐fluctuating trend. The resistance is highest at 3°, with a resistance increase rate of 7.35%. Furthermore, the resistance of the electrical connection structure varies with the radial offset of the male head, following a power function. Contact failure occurs when the radial offset is 1.31 mm, and the resistance increase rate reaches 24.9% at a radial offset of 1.58 mm.

Study of Equipotential Bonding

Experimental Study of Protection Measures for Preventing 10 KV Insulated Conductors from Breakage Caused by Lightning Stroke

Electro-Thermo-Mechanical Characterizations of Various Wire Bonding Interconnects Illuminated by an Electromagnetic Pulse

Problems about Protective Equipotential Bonding and Protective Earthing Applications

Discussion of application of equipotential in computer room

Ground Potential Distribution and Human-body Touch Voltage in Old Residential Communities

Assessment of fault potential and touch voltage in the low-voltage distribution line system of the residential community

Influence of vertical grounding electrodes on electrical characteristics of grounding systems

Study on a Contact-Less Power Transfer System Based on Detachable Transformer Analysis

Equipotential shielding voltage sensor for contact measurement of transient voltage in EHV/UHV power grids

Study on High Impedance Grounding Fault Protection for Personal Safety Guard in Distribution Grid

Study on transient electric shock characteristics between human body and metal clothes hanger on residential platform near UHV AC transmission lines

A Study of the Copper Wire Ball Bonding Processes

Electrical contact with dielectric breakdown of interfacial gap

Measurement and Safety Criteria of Step Voltage of High Voltage Direct Current Grounding Electrode

Grounding System Design Method in High Soil Resistivity Regions

Study on Arc Characteristics and Influencing Factors of Cup-Shaped Axial Magnetic Field Contact at Different Gap Distances

Study on the Influence of 10kV Insulator and Metal Binding Wire Form on Partial Discharge in Distribution Network

Preliminary experimental study on the mechanisms of explosion-electric coupling

Analysis of electrical contact characteristics of strap contacts used in high voltage bushings under eccentric conditions

Simulation Study of the Measurement Characteristics of Equipotential Shielding Capacitor Voltage Divider