Abstract:Since the dead-zone fault in substations often has a relatively long removal time, it may damage the insulation of power equipment and even threaten the stability of the power system. In this paper, the movement of the dead-zone fault electric arc in a 220-kV substation is investigated. The arc chain model for the dead-zone fault electric arc is developed; the influences of electromagnetic force, thermal buoyancy, and the air resistance stressed on the electric arc are comprehensively considered. The electric arc velocity and displacement are computed. Then, the spreading characteristics of the dead-zone electric arc under various conditions are studied. The spreading trend of the dead-zone fault electric arc is summarized. Finally, measures to inhibit the spreading of the electric arc are suggested. The study indicates that the movement of the electric arc in the dead zone during the early stage is primarily influenced by the electromagnetic force resulting from the overpass and conductor, and the arc is concave and has an irregular trajectory. The inclination angle of the conductor significantly affects the direction of the electromagnetic force. If the conductor is laid horizontally, the electric arc is subjected to a smaller force. The electromagnetic force stressed on the electric arc is mainly attributed to the fault phase conductor and the electric arc body itself, whereas those from the other phase conductors are minor. The initial position of the arc root has a certain impact on the movement of the electric arc. The use of the insulating materials restricts the arc root movement.

Experimental research on the fault arc arcing process and electrode temperature distribution of a 220VAC power system

Experimental Research on the Thermal Characteristic of Low-Voltage Alternating Current (AC) Arc Faults

Experimental Research on Heat Transfer and Ignition Characteristics of Series Fault Arc Combustion in 220VAC Power System

An experimental study on the thermal characteristics and heating effect of arc-fault from Cu core in residential electrical wiring fires

Experimental Study of Protection Measures for Preventing 10 KV Insulated Conductors from Breakage Caused by Lightning Stroke

Numerical investigations of AC arcs' thermal characteristics in the short gap of copper-cored wires

Motion behavior of a high-current fault electric arc occurred in the dead zone of protection in a substation

Experimental and theoretical research on the temperature evolution law of overcurrent fault wires

Researches on Spectrums and Macroscopic Forms of DC Arc in a Short Air Gap

Study on arc characteristics and combustion feature of tree-wire discharge fault in distribution line

Research on dynamic characteristics of arc under electrode relative motion

DC Arc Numerical Calculations and Experimental Researches Based on the Arcing Horn Used in Over-head Line

Numerical Simulation on Thermal Decomposition Process of Electric Arc Fault in Epoxy Resin Impregnated Paper Bushing

An experimental study on the combustion process and thermodynamic characteristic parameters of copper wire overcurrent fault

Influence of Arc Size on the Ignition and Flame Propagation of Cable Fire

Experimental Study on the Extinction Characteristics of Secondary Arc Under Different Secondary Arc Currents Near Outdoor Insulator

Research on Early Fault Detection Method for a New Distribution System Based on Automatic Arc Power

Experimental study on the DC discharge characteristics of wire-to-cylinder electrode configuration at high temperature

Glowing Contact in Electrical Fires: Experimental Investigation and Modeling on Its Heat Intensity and Thermal Hazards

DC Arc Self-Extinction and Dynamic Arc Model in Open-Space Condition Using a Yacob Ladder

Arc stability and ablation characteristics in O2, N2, and air environments