Abstract:The positron source is one of the most important parts of the circular electron–positron collider (CEPC) linear accelerator. The design goal is to obtain a 3 nC bunch charge positron beam from a 4 GeV primary electron beam with an intensity of 10 nC/bunch. In this study, an all-solid-state, high-current pulse power system was developed to drive a flux concentrator to capture positrons by generating a magnetic field with a peak value of 6 T. Based on the inductive load topology circuit, the optimized parameters were designed to generate a pulse current with a high peak value and a high rise rate pulse current. In addition, a non-reverse voltage was realized to protect the solid-state switch components. For the characteristics of the long-distance transmission between the pulse power supply and the load in the system, the influences of the cable distribution parameters on the pulse were analyzed, and the design of the damping circuit was proposed to suppress the high-frequency ripples of the peak pulse current. An optimized coaxial discharge structure was designed to reduce the stray parameters in the main circuit. The design was verified through simulations and experiments, and the results demonstrated that the developed prototype successfully generated an ideal half-sinusoidal pulse current with a peak value of 15 kA, and a front pulsewidth of $2.5 ~\mu \text{s}$ at a repetition rate of 50 Hz. The pulse repetition stability is better than 0.1%. The final output was consistent with the theoretical analysis. The system can be applied in the CEPC positron source, which also provides a reference for the subsequent development of a positron source system at research facilities.

Theoretical Calculation of a Long Pulse Power Supply for Linac

Rf Design of a Pulse Compressor with Correction Cavity Chain for Klystron-Based Compact Linear Collider

A high power charging power supply for capacitor in pulsed power system

Proof-of-Principle Research on a Novel Compact Linac

Design and Simulation for Compact and Integrative Pulsed Power Supply Using POS

Development of a 40kV/20kW, switching-mode pulse forming network charging power supply

Design of high reliability pulse xenon lamp power supply

Development of a Solid-State, High-Current, Repetitive Pulse Power System for Positron Source Prototype

Design of 130 MW High Power Pulse Modulator

Design of Accelerating Structure on a Novel Compact Electron Linac

Study on Strip Spiral Blumlein Line for the Pulsed Forming Line of Intense Electron-Beam Accelerators

Design of a 10 MeV normal conducting CW proton linac based on equidistant multi-gap CH cavities

Simulation Analysis of A Pulsed Compact Fltd System for Large-Area Hard X-Ray Sources

Design and Simulation of a Multimodule Superconducting Inductive Pulsed-Power Supply Model for a Railgun System

Prototype of repetitive pulsed power supply for the RCS beam extraction kicker in the CSNS upgrade

Development of a Pulsed Power Supply with Tens of Milliseconds Flattop Time.

Prototype Development of Pulsed Power Supply for HT-6M Tokamak

Beam Dynamics Pre-Design with KONUS Principle for the DTL of SPPC P-Linac

Development of a Long Pulse High Power Klystron Modulator for the ESS Linac based on the Stacked Multi-level Topology

A Pulsed Power Supply Based on an Optimized SFPFN Scheme Producing Large Currents With a Flat Top on a Heavily Inductive Load

The RF Design of a Compact, High Power Pulse Compressor with a Flat Output Pulse