Abstract:With the growing demand for FEL light sources, cost issues are being reevaluated. To make the machines more compact, higher frequency room temperature linacs are being considered, specifically ones using C-band (5.7 GHz) rf technology, for which 40 MV/m gradients are achievable. In this paper, we show that an X-band (11.4 GHz) linac using the technology developed for NLC/GLC can provide an even lower cost solution. In particular, stable operation is possible at gradients of 100 MV/m for single bunch operation and 70 MV/m for multibunch operation. The concern, of course, is whether the stronger wakefields will lead to unacceptable emittance dilution. However, we show that the small emittances produced in a 250 MeV, low bunch charge, LCLS-like S-band injector and bunch compressor can be preserved in a multi-GeV X-band linac with reasonable alignment tolerances. The successful lasing and operation of the LCLS [1] has generated world-wide interest in X-ray FELs. The demand for access to such a light source by researchers eager to harness the capabilities of this new tool far exceeds the numbers that can be accommodated, spurring plans for additional facilities. Along with cost, spatial considerations become increasingly important for a hard X-ray machine driven by amore » multi-GeV linac. The consequent need for high acceleration gradient focuses attention on higher frequency normal conducting accelerator technology, rather than the superconducting technology of a soft X-ray facility like FLASH. C-band technology, such as used by Spring-8, is a popular option, capable of providing 40 MV/m. However, more than a decade of R&D toward an X-band linear collider, centered at SLAC and KEK, has demonstrated that this frequency option can extend the gradient reach to the 70-100 MV/m range. The following design and beam dynamics calculations show an X-band linac to be an attractive choice on which to base an X-ray FEL.« less

Proof-of-Principle Research on a Novel Compact Linac

FOR A PHOTO-NEUTRON SOURCE DRIVEN BY 15 MeV ELECTRON LINAC

Design of Accelerating Structure on a Novel Compact Electron Linac

Feasibility of producing a short, high energy s-band linear accelerator using a klystron power source

A Compact X-Band Linac for an X-Ray FEL

Physical design of a single-amplifier-driven proton linac injector for a synchrotron-based proton-therapy system in China

Fast-bunching Design of Compact Heavy Ion RFQ Linac

Parameters Optimization for A Novel Vacuum Laser Acceleration Test at BNL-ATF

Design of a compact RFQ linac for the transportable neutron source

Design and simulation of an S-band compact multi-beam klystron

Fabrication and cold test of prototype of spatially periodic radio frequency quadrupole focusing linac

Beam physics design of a superconducting linac

Design of a Compact Short Pulse Positron Source Based on Laser Plasma Accelerators

Design of a high-power compact SRF linac for industrial applications of e-beam irradiation

Design of a CW linac for the Compact Intense Fast NEutron Facility

Design of a 10 MeV normal conducting CW proton linac based on equidistant multi-gap CH cavities

Status of the RFD Linac Structure Developement

Optimization of the Compact Gamma-ray Source Based on Inverse Compton Scattering Design

Beam Commissioning for a Superconducting Proton Linac

Physical Design of A 10 Mev Linac for Polymer Radiation Processing

Beam Line Design of Compact Laser Plasma Accelerator