Abstract:The higher efficiency of superconducting radio-frequency (SRF) cavities compared to normal-conducting ones enables the development of high-energy continuous-wave linear accelerators (linacs). Recent progress in the development of high-quality Nb$_3$Sn film coatings along with the availability of cryocoolers with high cooling capacity at 4 K makes it feasible to operate SRF cavities cooled by thermal conduction at relevant accelerating gradients for use in accelerators. A possible use of conduction-cooled SRF linacs is for environmental applications, requiring electron beams with energy of $1 - 10$ MeV and 1 MW of power. We have designed a 915 MHz SRF linac for such an application and developed a prototype single-cell cavity to prove the proposed design by operating it with cryocoolers at the accelerating gradient required for 1 MeV energy gain. The cavity has a $\sim 3$ $\mu$m thick Nb$_3$Sn film on the inner surface, deposited on a $\sim4$ mm thick bulk Nb substrate and a bulk $\sim7$ mm thick Cu outer shell with three Cu attachment tabs. The cavity was tested up to a peak surface magnetic field of 53 mT in liquid He at 4.3 K. A horizontal test cryostat was designed and built to test the cavity cooled with three Gifford-McMahon cryocoolers. The rf tests of the conduction-cooled cavity, performed at General Atomics, achieved a peak surface magnetic field of 50 mT and stable operation was possible with up to 18.5 W of rf heat load. The peak frequency shift due to microphonics was 23 Hz. These results represent the highest peak surface magnetic field achieved in a conduction-cooled SRF cavity to date and meet the requirements for a 1 MeV energy gain.

Status of the RFD Linac Structure Developement

Novel Approaches to High-Power Proton Beams

Design of a high-power compact SRF linac for industrial applications of e-beam irradiation

Future Trends in Linacs

RF cavity design and qualification for proton accelerator

THE R&D STATUS OF SSC-LINAC

An Advanced NCRF Linac Concept for a High Energy e$^+$e$^-$ Linear Collider

THE R&D STATUS OF SSC LINAC

Fabrication and cold test of prototype of spatially periodic radio frequency quadrupole focusing linac

Commissioning Status of the Linac for the Facility for Rare Isotope Beams

Design of a compact RFQ linac for the transportable neutron source

Development of a prototype superconducting radio-frequency cavity for conduction-cooled accelerators

Low Level RF System of the LIGHT Proton Therapy Linac

Beam Dynamic Design and Study of a Linac with Variable Output Energy for an AB-BNCT Facility

Design of a Marx-Topology Modulator for FNAL Linac

Enabling a Multi-Purpose High-Energy Neutron Source Based on High-Current Compact Cyclotrons

CRRFA-30 L Band Linac

An 800-MeV superconducting LINAC to support megawatt proton operations at Fermilab

Beam Dynamics simulations for ERDC project -- SRF linac for industrial use

Physical Design of A 10 Mev Linac for Polymer Radiation Processing

Preliminary RF design of an X-band linac for the EuPRAXIA@SPARC_LAB project