Abstract:A plate-type anodic alumina supported Cu composition catalyst was developed to investigate its catalytic performance in steam reforming of dimethyl ether (DME). It is found that the fresh Cu/gamma-Al2O3/Al catalyst without H-2 pre-reduction treatment exhibited the similar catalytic activity as the pre-reduced one. The XPS results show that Cu+ species exist in the surface of the fresh catalyst, which results in the self activation reaction. However, the Cu/gamma-Al2O3/Al catalyst showed a quick deactivation at 350 degrees C due to the sintering of copper. As an approach, a second component Ni was doped to the Cu-based catalyst, and a series of Cu/Ni/gamma-Al2O3/Al catalysts with different Ni loadings were prepared by impregnation method. Furthermore, the effect of nickel loading and chemical state on the activity of catalyst was extensively investigated. The results show that the catalytic performance was related to both of the nickel loading and chemical state. The proper amount of nickel doping is helpful in improving the dispersion of copper species, and thus enhancing the catalytic activity. Finally, a 180 h stability evaluation was carried out and the results show that the optimized Cu/Ni/gamma-Al2O3/Al catalyst has an excellent stability under critical conditions with 400 degrees C, and gives a 100% DME conversion, which demonstrated that the novel gamma-Al2O3/Al monolith supported Cu and Ni composite catalyst was an excellent catalyst for steam reforming of dimethyl ether. (C) 2016 Elsevier Ltd. All rights reserved.

Study on the catalysts for dimethyl ether steam reforming

Experiment on bi-functional catalyst of dimethyl ether steam reforming for hydrogen production

Experiment on Bi-functional Catalyst of Steam Reforming by Dimethyl Ether

Steam reforming of dimethyl ether over a novel anodic γ-Al2O3 supported copper bi-functional catalyst

Steam Reforming of Dimethyl Ether over Coupled Zsm-5 and Cu-Zn-Based Catalysts

Experiment on the Performance of Steam Reforming by Dimethyl-ether

A Structured Cu-based/γ-Al2O3/Al Plate-Type Catalyst for Steam Reforming of Dimethyl Ether: Self-activation Behavior Investigation and Stability Improvement

A Structured Cu-Based/γ-Al2O3/Al Multifunctional Catalyst for Steam Reforming of Dimethyl Ether: Investigation on In-Situ CO Reduction Strategy

Production of hydrogen from dimethyl ether over catalysts

Fe–Ni–Ce–Zr-modified CuO–ZnO catalyst for methanol steam reforming

Application of Porous Anodic Alumina Monolith Catalyst in Steam Reforming of Dimethyl Ether: Cu/γ-Al2O3/Al Catalyst Degradation Behaviors and Catalytic Activity Improvement by Pre-Competition Impregnation Method

Catalytic steam reforming of dimethyl ether for hydrogen production

Steam Reforming of Dimethyl Ether over Coupled Catalysts of CuO-ZnO-Al2O3-ZrO2 and Solid-acid Catalyst

Steam Reforming of Dimethyl Ether over CuO–ZnO–Al2O3–ZrO2 + ZSM-5: A Kinetic Study

A Monolith CuNiFe/γ-Al2O3/Al Catalyst for Steam Reforming of Dimethyl Ether and Applied in a Microreactor

Innovative Cu/Ni/Fe/γ-Al2O3/Al Mesh-Type Catalyst and Compact Plate Reactor Design for Steam Reforming of Dimethyl Ether

Improvement of a Mesh-Type Cu/Ni/γ-Al2O3/Al Catalyst for Steam Reforming of Dimethyl Ether by Metal (Fe, Zn or La) Addition for CO in Situ Removal

Hydrogen Production from Steam Reforming of Methanol over Cuo/Zno/Al2o3 Catalysts: Catalytic Performance and Kinetic Modeling

Review on Copper and Palladium Based Catalysts for Methanol Steam Reforming to Produce Hydrogen

Oxide-modified HZSM-5 for efficient production of hydrogen via steam reforming of dimethyl ether

Assembly of hydrolysis, activation and reforming sites boosting steam reforming of DME over ZnO/TiO 2 catalysts