Abstract:The transition section between bottom dense zone and top dilute zone is important for fast gas-solids catalytic reactions,such as methanol to olefins(MTO).Solids concentration and fluctuation parameters in the transition section of a fluidized bed with 95 mm i.d.were measured by using reflective optical fiber probe(PV6D).The influences of superficial gas velocity and static bed height were investigated.An Eulerian-Eulerian two-fluid model that incorporated kinetic theory of granular flow and modified three-zone drag law was used to predict the flow structure in the turbulent fluidized bed.The axial and radial distributions of solids concentration were simulated by means of computational fluid dynamics(CFD).The experiments showed two axial profiles of solids distribution in the transition section:exponential and S-shaped.The maximum gradients of both axial and radial solids concentration profiles were located in the transition section,which meant that solids distribution in the transition section was much more non-uniform than that in the dilute and dense sections.The change of gas velocity and static bed height would cause a shift between exponential and S-shaped profiles,and significantly affect solids concentration in the dense region near the wall and at the bottom.Probability density distribution of local solids concentration revealed that when static bed height was small,the location of maximum voidage would gradually move from core region to annular region with increasing gas velocity,resulting in a bimodal distribution of voidage.A modified three-zone drag model was proposed by taking the effect of particle clustering into account for CFD simulation.The simulated solids concentration distribution agreed well with experimental data in the transition section except for the distributor zone.

Liquid-Solid Mass Transfer of Catalyst in a Reactive Distillation Column with Different Packing Method

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Exploring the Essence of Three-Phase Packed Distillation: Substantial Mass Transfer Computation

Effect of packing density of hollow fiber contactors on shell-side mass transfer in distillation

Mass Transfer Characterization for Hydrocarbon Liquid–particle Collision Based on Sensitive Tracing of Fluorescent Probe

Direct-Contact Condensation of Hydrocarbon Mixtures in A Structured Packing Bed

Modeling of Mass Transfer Characteristics of Bubble Column Reactor with Surfactant Present

Liquid–Liquid Mass Transfer Enhancement in Milliscale Packed Beds

MASS TRANSFER MODEL FOR CATALYST CAPSULE IN CATALYTIC DISTILLATION (II) MENSURATION AND CALCULATION OF EFFECTIVENESS FACTOR

Liquid-solid mass transfer in a rotating packed bed reactor with structured foam packing

Influence of liquid viscosity on mass transfer of structured packing in CO2 absorber

[Gas-Liquid Mass Transfer in Three-Phase Inverse Turbulent Bed Reactor].

Effect of Fiber Packing Density on Performance and Mass Transfer of Hollow Fiber Membrane Contactor

Mass Transfer Performance of Structured Packings in a CO2 Absorption Tower

Automated measurements of gas‐liquid mass transfer in micropacked bed reactors

Extending Mass Transfer Correlations For Packed Three-Phase Distillation Simulation: A Hierarchical Parameter Estimation Methodology

A convenient method for measuring gas-liquid volumetric mass transfer coefficient in micro reactors

Investigation of Effective Interfacial Area in Micropacked Bed Reactors

Mass Transfer Coefficient for Two-Phase Countercurrent Flow in a Packed Column with a Novel Internal

Liquid Mixing in Column Containing Compound Structrued Packing

Gas-Liquid Mass Transfer in A Slurry Bubble Column Reactor under High Temperature and High Pressure