Abstract:The effect of phosphogypsum (PG) on the hydration and retardation mechanism of phosphogypsum-based excess-sulfate slag cement (PESC) was mainly investigated. Based on the natural characteristics of PG, such as low pH value and the presence of soluble phosphorus impurities, the content of PG passing the 4.75 mm standard sieve was used as a variable to study the retardation mechanism of PG on PESC. It can be inferred from the heat flow and cumulative heat flow that the induction period is significantly prolonged with the content of PG, which is also reflected in the increase of the setting time of PESC. In the early period of hydration, as the content of PG increases, the soluble phosphorus concentration increases, and the pH value decreases. The changes in soluble phosphorus concentration and pH value affect the microstructure and amount of hydrates. Combined with experimental results, it has been demonstrated that the delay in the hydration of PESC by PG content is mainly due to: the excessive dissolution of Ca 2+ and SO 4 2- promotes the recrystallization of dihydrate gypsum; the dissolution of soluble phosphorus reduces the pH value in the pore solution and forms precipitates of calcium phosphate and hydroxyapatite; in the initial reaction period, a large amount of ettringite and C-S-H gel precipitate to form a protective film; the decrease in pH value leads to a decrease in carbonization resistance, and CO 2 in the air is more likely to attack the PESC paste, react with alkaline substances in PESC, or degrade hydrated C-S-H and ettringite. The above factors all lead to a decrease in exchangeable ions during the hydration, thereby prolonging the setting of PESC.

Effects of Retardant Borax on Hydration and Harden Process of Magnesia-phosphate Cement Pastes

Effect of borax on the hydration and setting of magnesium phosphate cements

Study on the hydration process and borax retarding mechanism of the magnesium ammonium phosphate cement-based coating system

Function and effect of borax on magnesium phosphate cement prepared by magnesium slag after salt lake lithium extraction

Property Assessment of Magnesium Phosphate Cement

Effects of Bauxite Tailings and Sodium Silicate on Mechanical Properties and Hydration Mechanism of Magnesium Phosphate Cement

Effect of Phosphoric Acid and Soluble Phosphate on the Properties of Magnesium Oxychloride Cement

Effect of Magnesium-containing Modifier on the Properties of Boron Aluminum Phosphate Inorganic Binder and Its Heat-cured Molding Sand

Effect of the Retarder on Initial Hydration and Mechanical Properties of the "one-step" Alkali-activated Composite Cementitious Materials

Effects of magnesia and borax on the compressive strength and microstructure of phosphoric acid-activated metakaolin geopolymer

Magnesia Hardener for Phosphate Binder

Retardation mechanism of phosphogypsum in phosphogypsum-based excess-sulfate cement

Combined effect of NaAlO2 and NaOH on the early age hydration of Portland cement with a high concentration of borate solution

Effects of Borax, Sucrose, and Citric Acid on the Setting Time and Mechanical Properties of Alkali-Activated Slag

Effect of zinc oxide on magnesium potassium phosphate cement synthesis

Effects of several retarders on setting time and strength of building gypsum

Hydration properties of magnesium phosphate cement paste mixed with metakaolin and silica fume

Effects of reactive MgO on durability and microstructure of cement-based materials: Considering carbonation and pH value

The Influences of Soluble Phosphorus on Hydration Process and Mechanical Properties of Hemihydrate Gypsum under Deep Retarding Condition

Anti-Corrosion Performance of Magnesium Potassium Phosphate Cement Coating on Steel Reinforcement: The Effect of Boric Acid