Abstract:Due to natural erosion and human interference, limestone artifacts often suffer from cracks and gradual detachment. There is a critical need for new bonding materials that possess excellent aging resistance and high compatibility with the artifact substrates. This study investigates the effects of varying proportions of citric acid (CA) and borax (B) as composite retarders on the fundamental properties of magnesium phosphate cement (MPC). Through the application of X-ray diffraction techniques and cold field emission scanning electron microscopy, this research elucidates the mechanisms by which the retarders affect MPC. It was found that a 5 % addition of CA and B significantly reduces the hydration temperature during the early stages of MPC setting, enhances the unconfined compressive strength (reaching 44.3 MPa at 28 days), and allows for controllable setting times (17 minutes). Additionally, the presence of CA was found to delay crystal growth, resulting in an increased quantity of the amorphous phase and higher density of MPC. The optimal MPC formulation was selected as a bonding and repair material for limestone artifacts. For comparative analysis, traditional glutinous rice lime mortar (GL) and commercially available epoxy resin (EP) were tested under wet-dry cycling and UV aging conditions. Results indicated that EP materials demonstrated significant aesthetic incompatibilities and progressive cracking and detachment as aging tests progressed. GL materials exhibited significantly lower bonding strength compared to EP and MPC. In contrast, MPC displayed excellent aging resistance, moderate bonding strength, and a Shore hardness value closely matching that of the limestone substrates. Therefore, highstrength, rapid-hardening MPC represents a valuable and forward-looking solution for the conservation of limestone artifacts.

Magnesia Hardener for Phosphate Binder

Exploration on the Composite Hardener for No-Bake Phosphate Binder Sand

A New Compound Phosphate Heat-Cured Foundry Binder

Suspension Curing Agent for Phosphate Binder Bonded No-baked Sand

Effect of Magnesium-containing Modifier on the Properties of Boron Aluminum Phosphate Inorganic Binder and Its Heat-cured Molding Sand

Effect of Factors on Strength and Stability in No Bake Sand Phosphate Inorganic Binder

Property Assessment of Magnesium Phosphate Cement

Study on the Storage Stability of High Neutralization Degree Phosphate-Bonded No-Bake Sand

Cementitious and hardening properties of magnesia (MgO) under ambient curing conditions

Effect of Phosphoric Acid and Soluble Phosphate on the Properties of Magnesium Oxychloride Cement

Study on flexural resistance and hydration mechanism of magnesium phosphate cement

Effect of fly ash and curing temperature on the properties of magnesium phosphate repair mortar

Hydration properties of magnesium phosphate cement paste mixed with metakaolin and silica fume

The Influence of the Magnesium-to-Phosphate Molar Ratio on Magnesium Potassium Phosphate Cement Properties Using Either Wollastonite or Volcanic Ash as Fillers

Hydration and Properties of Magnesium Potassium Phosphate Cement Modified by Granulated Blast-Furnace Slag: Influence of Fineness

Mechanical Properties and Hardening Mechanism of Magnesium Ammonium Phosphate Cements Modified by Fly Ash

Effects of fly ash, phosphoric acid, and nano-silica on the properties of magnesium oxychloride cement

Mechanism of Strength Loss of No-Bake Phosphate Bonded Sand Mold/core

Effect of Metakaolin on the Water Resistance of Magnesium Phosphate Cement Mortar

Research on New Al-Mg-B Compound Phosphate Inorganic Binder for Heat Cured Sand

Research on High-Strength and Rapid-Hardening Magnesium Phosphate As a Novel Bonding Material for Limestone Artifacts