Abstract:Water permeability of reinforced concrete is essential for transportation of ingress ions inside concrete structures. The coupling effect of permeability and loading presents a challenge for the experimental simulation of water-permeate reinforced concrete subjected to tension. This renders the development of the model based on dimensionless analysis, using a series of experimental tests from an innovative experimental system that allows simultaneous measurement of permeability and crack width. The experiments focused on both ordinary concrete and high strength concrete under tension. The relationship between permeability and variables such as deformation, diameter of rebars, tensile load, and crack width under tension was formulated through multiple regression analysis using the testing data. The load to deformation characteristics determines the permeability of the concrete under tension. The proposed model accounts for the influence of continuous loading on permeability, as demonstrated by the robust analysis and proposed yield effective point. The robust analysis demonstrates that the diameter of the rebar, load, and crack width exert minimal influence on the permeability of concrete at lower significance levels. However, permeability variations become pronounced from 0.5 threshold, with significant changes observed between 0.5 and 0.9 thresholds. The findings indicate a differential impact of the variables on the permeability of concrete under tension. The yield-effective points delineate the relationship between the rebar diameter, load, and crack-width on the permeability of concrete with a threshold of 0.5, 0.5, and 0.58, respectively. At a threshold of 0.78, higher permeability will occur in the concrete, attributed to the prevalence of deformation. This deformation highlights the parameters with the most significant influence on the permeability of concrete under tension. The robust analysis and yield effective point derivative are useful parameters to measure concrete permeability and evaluate the behavior of the permeability model under tension.

A Device for Testing the Water Permeability of Concrete under the Tensile Deformation

Experimental research on the strength of concrete mearsured by limpet

Newly Developed Multifunction Device for Consolidation, Permeability and Gas-Injection Tests

Measurement of Permeability and the Correlation Between Permeability and Strength of Pervious Concrete

Experimental Study on Mechanical Properties of Permeable Concrete

A New Test Method to Simulate Chloride Penetration into Concrete in Tidal Zone

Optimization of field test method on durability of coastal concrete structure

Effects of controlled permeability formwork on surface properties and early age shrinkage of concrete

TESTING METHOD FOR CHLORIDE-ION PERMEABILITY OF CONCRETE UNDER TENSILE LOAD

Dimensionless analysis-based permeability model of reinforced concrete under tension

Methods and test apparatus of permeability coefficient determination with cement-based materials

Development of cementitious capillary crystalline waterproofing agents and durability study of concrete in the presence of chloride with sulfate in aqueous environment

EXPERIMENTAL RESEARCH ON WATER FLOW BEHAVIOUR IN A SINGLE CRACK OF CEMENT-BASED MATERIALS

Experimental study on water fracture interactions in concrete

Gas Permeability of Concrete in Service

Evaluation of concrete surface permeability: A dynamic water film-based approach

Experimental study of water flow behaviour in narrow fractures of cementitious materials

Testing System for Mechanical Behaviors Analysis and Cracking Resistance of Concrete at Early Age

An Innovative Test Method for Tensile Strength of Concrete by Applying the Strut-and-Tie Methodology

Experimental investigation on hydraulic fracturing in cement mortar with tensile stress

Experimental study on seepage evolution and microscopic characteristics of initially damaged concrete under variable confining pressure