Abstract:This study aims to examine the impact of service loading and dry-wet-freeze–thaw environments on the initial damage caused to concrete, and conducts initial damage concrete permeability testing and microscopic characterization under varying confining pressure. The evolution pattern and mechanism of specimen permeability are analyzed using the confining pressure sensitivity coefficient, permeability recovery rate, and causeless radial strain. The results indicate that permeability exhibits nonlinear characteristics during the process of confining pressure loading and unloading. The initial permeability increases with increasing load level and the number of dry-wet-freeze–thaw cycles. The loading process can be divided into a sensitive area, a transition area, an insensitive area, and a steady area, according to the confining pressure sensitivity coefficient. The permeability in the sensitive area decreases the most with the increase of confining pressure, while the permeability in the steady area hardly changes. A smaller permeability recovery rate after confining pressure unloading leads to a larger dimensionless radial strain and lower permeability value. Utilizing nuclear magnetic resonance (NMR) and scanning electron microscopy (SEM), it was observed that the initial damage caused the expansion of microcracks and micropores in the specimen, leading to a subsequent amplification of the seepage channels, ultimately resulting in a substantial increase in the specimen's permeability. When confining pressure is loaded, the internal pore structure of the specimen undergoes elastic–plastic deformation. Upon confining pressure unloading, the proportion of macropores in the specimen decreases by 78.79%, resulting in incomplete restoration of the permeability value.

Experimental study on water fracture interactions in concrete

Effect of water pressure on fracture parameters of concrete

Test Study of Concrete Fracture Under Water Pressure

Experimental study of water flow behaviour in narrow fractures of cementitious materials

Experimental investigation on hydraulic fracturing in cement mortar with tensile stress

Water Transport in Unsaturated Cracked Concrete under Pressure

EXPERIMENTAL RESEARCH ON WATER FLOW BEHAVIOUR IN A SINGLE CRACK OF CEMENT-BASED MATERIALS

WATER FLOW BEHAVIOUR ACROSS ROUGH FRACTURED SURFACES OF CEMENT-BASED MATERIALS

Investigating the Self-Healing Performance of Cracked Undersea Constructions

Effect of water pressure on mechanical behavior of concrete under dynamic compression state

Experimental study on characteristics of bending cracks of compacted soil beams

Experimental study on fracture properties of self-compacting concrete

Experimental Study on Direct Shear Performance of Concrete-Concrete Interface of Prefabricated Structure Sleeve Grouting Connection

Fracturing behaviors of FRP-strengthened concrete structures

Water saturation effects on the mechanical characteristics and fracture evolution of sandstone containing pre-existing flaws

Impact of Fracture–Seepage–Stress Coupling on the Sustainability and Durability of Concrete: A Triaxial Seepage and Mechanical Strength Analysis

EXPERIMENTAL STUDY ON WATER FLOW BEHAVIOR THROUGH FRACTURE SURFACES OF CEMENT-BASED MATERIALS

Experimental study on seepage evolution and microscopic characteristics of initially damaged concrete under variable confining pressure

Study on damage mechanism of concrete under water jet combined with mechanical breaking

Experimental and theoretical investigation on hydraulic fracturing in cement mortar exposed to sulfate attack

Influence of free water on the quasi-static and dynamic strength of concrete in confined compression tests